Jump to content
SAU Community

Might be of interest to the track teams....


Recommended Posts

Group buys on sabelt harnesses?? 4 Points and expire in 2009.

They also come with with the shoulder pads.

Theyre selling for just over $200AUD without shipping or taxes so probably cost less than 300 to get them landed.

How much are they usually???

http://nifty.amikai.com/AmiWeb?ami_url=htt...393819&r_n=4436

EDIT: ok it wont work so i will have to do it the pov way with screen dumps haha.

Pretty much the jist of it is that on yahoo japan they are selling them for 17400yen... that is the selling price not th start price. That works out to be just over 200AUD... shipping those things wont be a hell of a lot from Japan either so postage will probably be around $40 (PFC costs $40 and id say that weighs more)

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Theyre 3"

レースなどでの使用期限は2009迄です

The use term in a race etc. is to 2009.

★ここに注目!

* Observe here! 送料+しても、国内最安値!

Even if it mailing-cost + Carries out, it is a domestic maximum low price!

★品名

* Name of article サベルトTOP-FOMULABオール3インチパッド付 右用 青

With a SABERUTO TOP-FOMULAB all 3 inch pad For the rights Blue

★特徴

* Feature 2004年モデル正規輸入品。4ドア車からMR2などの2シータ-まで調整幅が大きい為取付けが容易。FIA公認で公式戦にも使用できます。

2004 model regular import. Since even 2 Sita, such as MR2, has large adjustment width from 4 door vehicles, attachment is easy. It can be used also for a regular-season game by FIA official recognition.

★国内参考価格

* Domestic reference price 22000円位

22000 yen grade

★bakebake販売価格

* bakebake selling price 17400円

17400 yen

★オプション販売1

* Option sale 1 サポートベルトV型(6点式)    4000円

Support belt V type (six-point formula) 4000 yen

★オプション販売2

* Option sale 2 サポートベルトI型(5点式)    3500円

Support belt I type (five-point formula) 3500 yen

★オプション販売3

* Option sale 3 ベルトキャッチステー(取付けが容易になります)    1050円

Belt catch SUTE (attachment becomes easy) 1050 yen

★オプション購入について

* Option purchase 購入ご希望の方は落札後、ご連絡下さい。

Those who wish [ purchase ] need to inform after a successful bid.

★振込総支払額

* The transfer total payment frame 17400円   +  送料

17400 yen + Mailing cost

★代引(525円)総支払額

* The cost 引 (525 yen) total payment frame 17925円   +  送料

17925 yen + Mailing cost

送料

Mailing cost

中部、北陸、近畿

The central part, Hokuriku, Kinki  900円

900 yen

関東、信越、   中国、四国

Kanto, Shin-etsu China, Shikoku 1000円

1000 yen

東北、九州

A northeast, Kyushu 1100円

1100 yen

北海道、沖縄

Hokkaido, Okinawa 1400円

1400 yen

送料・支払について

About a mailing cost and payment

♪支払総額

Total ♪ payment amount 落札金額+送料

Successful bid amount-of-money + mailing cost

♪その他

♪, others ノークレーム・ノーリターンにてお願いします。

I need your help by the no claim no return.

リンク

Link

♪マイブース。私の現在出品している他の商品は こちらをご覧ください。

♪ my booth. Other goods which have sent now [ of me ] Here Please have a look.

My Sparco harnesses are actually Sabelt. Mine look the biz so these are great value, most this price dont have the quick release buckle...lol you feel quick just doing up the buckle:)

Just be sure they are the long type, as some are "short" type for mounting of roll cage, most of us need the "long" type to mount off the rear parcel shelf

I got my sparco bonnet pins from Meridian Motorsport.... cost $35 but I think the price is a bit higher now.

As for the Sabelt TRW harnesses... If they're the blue one's pictured above with the 3" straps, rotor buckle (jet fighter style) and long straps for parcel shelf mounting then im in!! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...