Jump to content
SAU Community

Recommended Posts

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

no one should..

Just hate the whole kicking a man when he is down. He ****ed up and he is paying for it with fines and loss of license. Now lets use this opportunity to say yeah dude you ****ed up but did you nkow you can come to the track and its not expensive.

Exactly! As far as i see it: trackday will cost around $80 but also brake pads, petrol, time off work and the rest if i did miss something will equate to a $400 dollar day for some people. I do intend on going to trackdays and the rest when my car is finally sorted, so hopefully by the new year.

Why is it that we can find money to change the exhaust, bigger intercooler, flashy bodykit, eye catching paint job, ear deafening sound system, bigger turbo/injectors, pod lifters, 19 inch chrome wheels, etc... but trackdays are so expensive? Hell, I don't think the 1/4 mile strip is more than a trackday now. :confused:

If you think trackdays are expensive then isn't a speeding fine more expensive? Plus court fines, hiring a lawyer, etc...

Guest Randel

Dude I got done for 137 in a 90 zone on Mona Vale Rd and that got me 580 and 4 points (cause I had 12). Had I 6 or less they would have run home the suspension of 3 months. If you have over the 6 then generally the suspensions don't come into it. Got a mate who was clocked at 237 in a 110 and lost it for a year with a $2500 contribution to the policemans ball. So yours doesn't seem that bad does it.

Cheers

Randel

Why is it that we can find money to change the exhaust, bigger intercooler, flashy bodykit, eye catching paint job, ear deafening sound system, bigger turbo/injectors, pod lifters, 19 inch chrome wheels, etc... but trackdays are so expensive? Hell, I don't think the 1/4 mile strip is more than a trackday now. :confused:  

If you think trackdays are expensive then isn't a speeding fine more expensive? Plus court fines, hiring a lawyer, etc...

the answer is simple dude:

1. the risk of putting your car into a wall or another car and writing it off with your insurance company not honouring the claim because it was on a race track is far to great for some.

2. the risk of blowing your engine and having to fork out a) the cost of a rebuild and B) the tow back from the race track home is too expensive...

some people can't afford a $7k rebuild (at best) in one hit. buying the modifications you just listed probably took 2 or 3 months for some people to save up for....

B-Man, the bannana R34 is go00ne.....sold it 6 weeks ago to Erik in WA. poor bugger. kekekekkeke.....j/k. he got it for a steal....

hahaha, im serious Bman! we all dont have high disposable incomes like you do :P and im a permy mate, not a contractor :)

did you see my above edit?? car's goneeeeee - i thought i had this R32 GTR secured http://www.j-spec.com.au/list/0156 but it fell through....bummer...

anyways, back to topic, just for the record i can't afford to do a trackday a month althought i'd very much like to! because:

a) its taxing on the car

B) i've gotta take time off work

c) the hidden costs must be considered

d) the risk of putting the car into a wall is risky (hence the reason why i like Wakefield)

e) if i blow my engine, i aint got $7k cash lying around to get it back on the road

hrmmmmkay!? :)

ps. check this video out if you havent already, shit like this can happen anytime on a race track :)

http://www.skylinesaustralia.com/photopost.../cat/500/page/1

OMFG - that R32 is horn city. Sorry it fell through.

Dude , I went permy back in May - so in the same boat, contracting gave me my engine rebuild and that's about it.

Surely, you would have to agree that:

1) If you put your car into a wall on the street, you still have the risk that your insurance Co. won't cover you cause your car is not likely to be standard (ie Insurance null & void), or you were spotted being stupid (ie iF you are charged your insurance could become null and void). Even so - you are putting not only yourself but other pedestrians at risk. Silly stuff.

2) If you are worried about blowing your engine , it must have been modified in the first place (ie $$) so why not keep it stock and not worry about that sort of stuff - Majanal has done nearly 100,000 kms on his R33 - including more track & drift days that all of us put together and it still pulls like a $10 whore.

3) Taxing on the car - only of you let it - look after your car and it will be fine - or if you really want to speed fully hectic bro on the track - get a Suzuki swift GTI (5K ) for your track car and keep your Skyline for the street ( or vice versa)

4) Time off work - you get leave right - plus everyone pulls a few sickies - in addition, there are lots of trackdays on weekends

5) Hidden costs are the same as if you flog your car on the street

Sorry man - like I said, there is no argument for enjoying the track legally versus risking so much (including human life) by racing/speeding on the streets.

d) the risk of putting the car into a wall is risky (hence the reason why i like Wakefield)  

I'd be more worried about coming off than having some guy do the exact same thing right behind me....except right into my car.

wil..

p.s. pro trackday here :P

OMFG - that R32 is horn city. Sorry it fell through.

yeah was such a shame but oh well :P they are a dime a dozen im sure ;)

Dude , I went permy back in May - so in the same boat, contracting gave me my engine rebuild and that's about it.

hahahah, joining the plebs now hey :) now lets see if i can agree on some things with you :)

1) If you put your car into a wall on the street, you still have the risk that your insurance Co. won't cover you cause your car is not likely to be standard (ie Insurance null & void), or you were spotted being stupid (ie iF you are charged your insurance could become null and void). Even so - you are putting not only yourself but other pedestrians at risk. Silly stuff.

but when you don't declare your mods you are in full knowledge that you wont be covered, similarly to if you act negligently on the road - my point is, coming off at the track and hitting a wall is an unknown risk which some people aren't prepared to take knowing the consequences are that insurance claim wont be honoured if you were to smash your car.

don't get me wrong, i understand full well what everyone is trying to say about taking "enthusiastic" driving to a safer controlled environment like a track, but im also just trying to illustrate why some people would be hesitant in going...

2) If you are worried about blowing your engine , it must have been modified in the first place (ie $$) so why not keep it stock and not worry about that sort of stuff - Majanal has done nearly 100,000 kms on his R33  - including more track & drift days that all of us put together and it still pulls like a $10 whore.

duncan's r33 was a pretty stock r33 but hasn't that just gone through an engine rebuild? :)

3) Taxing on the car - only of you let it - look after your car and it will be fine - or if you really want to speed fully hectic bro on the track - get a Suzuki swift GTI (5K ) for your track car and keep your Skyline for the street ( or vice versa)

aren't you contradicting yourself here? :) i want to speed fully hectic bro on the track with my skyline (what was my skyline anyways) but i want it to be fine - why did you say i should get a cheap track car? i thought if you kept on top of servicing etc, things would be fine? are you saying trackwork is taxing on your car??? ;)

4) Time off work - you get leave right - plus everyone pulls a few sickies - in addition, there are lots of trackdays on weekends

im a corporate slave :)

5) Hidden costs are the same as if you flog your car on the street

i dont quite agree, but if you think a lap of wakefield or eastern creek has the same wear and tear factor as a 140km/hr squirt down homebush bay drive, i'll just have to agree to disagree :)

Sorry man - like I said, there is no argument for enjoying the track legally versus risking so much (including human life) by racing/speeding on the streets.

.........i agree whole heartedly!!!

my point is, not everyone can afford to goto the track. what they do on a public road is up to them.

Bush bashing and understeer -- always gonna happen at Wakefield :P

hahaha, in a wrx, yes :)

i really sorted out my suspension settings after that video....went to a softer swaybar setting and added 1.75 degrees neg camber to the front and it was just sublime....

the toyo trampios r1r's are also the best tyres i've ever had. id really like to test a set of azenis to see how they compare. after several trackdays the tyres got about 20,000km's out of them....awesome.

of course, all old Rb26s blow up as soon as you look at them....and I think mine lasted pretty damn well for the work it did.

Hey, if you can't afford to take a skyline to the track all the time, find a cheaper way to do it, buy an old club car, a $5k race only silvia etc etc. You'll get a hell of a lot more fun out of it than an occasional squirt down homebush bay drive followed by a 6 month suspension.

But I reckon Silver-Arrowz got it right, why would you spend money on intercooler, BOV, computer, suspension, exhaust, intake....and then complain you can't afford to take it on the track. What a crock. A stock skyline is quicker than 90% of other cars at the track

  • 2 weeks later...

RedX Says sorry dude you goooooooooneeeee do it out in middle of nowhere or cops will get5 you the more you risk other peoples lives the more the cops be there so do it out back of nowhere where if you stuff up only person you kill is you. Anyhow love your work keep it real six months is not long at all............

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...