Jump to content
SAU Community

Recommended Posts

Hey,

Well i think it time to add an ecu to my list of mods, and after doing abit of research wolf3d looks like the best opinion for the price it is :) But i still got a few question so if anyone could answer them it would be very helpful

1.I was told that the PLUG in PLAY Wolf3d does not do anti-lag and rotational idle is this ture?

2.possible to have antilag and rotational idle on a switch (on/off)?

3. I know with wolf u can hook it up to ur lap-top, whe u buy the wolf does it come with the ecu to pc cable and all the software? and can u view data in real-time while driving

4. What is the average price for the newest wolf3d (i havnt been able to find this yet) and install and tuning it with antilag, roational idle (if it can have it) on a stocky r33?

5. At the moment im running a Greedy ebc, is it worth removing it and just using the wolf to do the boost or should i keep it?

Thanks Mike

p.s yes paul i know antilag will kill my turbo :D

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/
Share on other sites

i can answer first question - i know it can run rotational idle :) Pauls car runs it occasionally - when steve wants to annoy him :)

nobody really runs Antilag on the street ...... only on the track ..... have you thought about how much it would cost to run antilag fulltime? :D

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/#findComment-1021095
Share on other sites

Mikey - im gathering you've never seen ca rthats running Antilag - cos if you had you'd know that its hardly wank factor ...... nos is wank factor ..... antilag just makes ya car sound like popcorn.

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/#findComment-1021109
Share on other sites

wank factory??? - how much to they sell a wank for?

rotational idle and antilag are two terms that your car should not come into contact with... i like the words advanced driver course first... also does the list of mods have a dump pipe on there or have you done that already?

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/#findComment-1021116
Share on other sites

wank factory??? - how much to they sell a wank for?

 

rotational idle and antilag are two terms that your car should not come into contact with... i like the words advanced driver course first... also does the list of mods have a dump pipe on there or have you done that already?

Sssssh i want to see the fireworks :Bang:

:D

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/#findComment-1021120
Share on other sites

RiaZ, pretty much everything is getting done at once, dump/front, hiflow cat, ecu, fmic possible plenum, z32 afm, fuel pump, and maybe injectors.

i want to get the ecu in 1st, as i had a dyno run at hyperdrive and the car was pinging at 0.6bar and didnt make that much power

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/#findComment-1021125
Share on other sites

hey thanks everyone for your great replys, i ask a few simple question and got only a few replys that help thanks niz and b_real

for the rest of you how about if u dont have anything to help me dont post anything at all. advance driver course? yeah good idea seeing as i have crash my r33 how many times? and that i drive like a tottal ****ing hoon 24/7

FFS, DONT REPLY IF U GOT NOTHING TO SAY ABOUT WAT I ASK PLZ!

Link to comment
https://www.sau.com.au/forums/topic/51622-wolf-time/#findComment-1021235
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...