Jump to content
SAU Community

Rx 7 series 8 vs gtr


Amir
 Share

Recommended Posts

i think i would have to go the RX-7 series 8 over the R33 GT-R but definately not a reasonable example of a R34 GT-R.... something about the R34 for me personally that screams "FUN" and lots of it....

hope you have a great time deciding what to buy, it's a tough call though

Link to comment
Share on other sites

I personally would go the Series 8 RX7, the compromise of cabin space and POTENTIAL reliability issues (not a problem with a good tuner and maintainence) not being enough to put me off. As a actual performance package the RX7 feels more balanced to me, light weight, good handling without the need for 4WD, an engine with the equivalent displacement of an RB26DETT (and just as much willingness to make power, not to mention happier pushing large turbos), obviously looks good, and after all that basically better peforming in many ways than anything short of a NurSpec R34 GT-R or NSX-R.... anyone who has watched Best Motoring videos from Japan would have seen the RX7s in stock form beating the non N1-type R34s on everything but 1/4 mile times - giving away the 1/4 mile times due to traction, not acceleration.

I have driven a fair range of cars, and I'd say don't knock the Series 8 unless you have actually driven them - they are HEAPS of fun. I'm also not putting down the GT-Rs, as much as anything it comes down to personal choice....

Link to comment
Share on other sites

I personally would go the Series 8 RX7, the compromise of cabin space  and POTENTIAL reliability issues (not a problem with a good tuner and maintainence) not being enough to put me off.  As a actual performance package the RX7 feels more balanced to me, light weight, good handling without the need for 4WD, an engine with the equivalent displacement of an RB26DETT (and just as much willingness to make power, not to mention happier pushing large turbos), obviously looks good, and after all that basically better peforming in many ways than anything short of a NurSpec R34 GT-R or NSX-R.... anyone who has watched Best Motoring videos from Japan would have seen the RX7s in stock form beating the non N1-type R34s on everything but 1/4 mile times  - giving away the 1/4 mile times due to traction, not acceleration.

I have driven a fair range of cars, and I'd say don't knock the Series 8 unless you have actually driven them - they are HEAPS of fun.  I'm also not putting down the GT-Rs, as much as anything it comes down to personal choice....

I havent seen the videos, but were the 1/4 mile times way off and do you recall the mph??

cheers

Oz

Link to comment
Share on other sites

I havent seen the videos, but were the 1/4 mile times way off and do you recall the mph??

cheers

Oz

There was a good percentage of a second difference in 1/4 mile times, basically the RX7 would get destroyed down the 1/4 and the trap speeds weren't listed. On the high speed bowl RX7s visibly reel in R34 GTRs, and while I can't remember the exact speeds - the RX7s had a measurably higher top speed over a measured distance.

Link to comment
Share on other sites

I had a Series 6 RX7 prior to my current R33 GTR.

Well what can I say, totally different type of cars. The RX7 is sexier and gets more looks - no doubt! The RX7 is rarer and I keep on getting people asking me what it is. :mad:

The handling is better than the GTR in the dry. In the wet forget about driving it, leave it in the garage. The RX7 can only fit 2 people even in the 4 seater model. You will struggle to fit into the driver seat if you are over 6ft. The Rotary engine is smoother and when it is tuned right it is the most awesome thing to drive. It is lighter and has a unique sound when you give it some revs.

Now I bought a R33 GTR, one because Ive always wanted one and two it is more practical where you can seat 4 ppl comfortably, it is more reliable and much better to drive in the wet. The GTR drinks a little less juice but only just. Insurance is about the same.

rx7_me.jpg

gtr_me.jpg

Let me know your decision.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • And yes would be going to tomei Japan for sure as it’s closer to me … 
    • Yeah I heard the same. Might be hard to order one. But then I guess can go to hks or go to a more expensive n1 block with tomei. Guess will jump the hurdle once I get there next upgrade around. I can’t get work done in the states as the lead time will take for ever on top of shipping to Hong Kong. 
    • https://www.platinumracingproducts.com/en-us/products/nissan-rb26-cast-blocks This is the solution I was thinking of. I would stay away from Tomei USA, their quality is a question mark to me. If you want an engine machined in the US contact Club DSPORT: https://clubdsport.com/ Tomei JP is probably fine but I recall they stopped doing pre-assembled short or long blocks. In general it's pretty tough to get any kind of RB26 block at the moment with Nissan so severely backordered.
    • PAR specifically offers stock ratios in their gearset and you could do whatever ratios are physically possible supposedly for no extra cost. I agree 6 ratios is better than 5, the factory 2nd gear is equivalent to the Getrag 2nd gear if you account for the differing final drive ratio though. The Getrag 3rd gear with a 3.916 final drive is equivalent to a 1.6 2nd gear in the FS5R30A. I'm about to swap the transmission out on my car, I'm tempted to send the one I have now out for rebuild with the standard "cross ratio" gearsets out there to see if it really makes such a big difference the next time I pull the transmission.
    • This is what I was looking at next:  https://www.z1motorsports.com/engines/tomei/tomei-rb26-28l-short-block-assemblies-p-45479.html as we can’t bore the cylinders out in hk so better just buy the whole lot in one and install then retune. Everyone saying the weak link are the bolts holding the rods together. I already did valve springs, arp head bolts, hks racing coils, nismo fuel pumps and pressure regulators, injectors etc for the top of the engine. 
×
×
  • Create New...