Jump to content
SAU Community

Need a Hi-Flow Cat >> where to get one @ good $??


Recommended Posts

Flying performance (www.flyn.com.au) are selling 8L High Flow Cats. I think they may even be Catco ones, on Ebay starting bid $199. I got one for $200. It's on the way. Or you can buy straight from their website for about $250.

dont expect the the rwc thing will be cut and dry, my rwc cos me $1200 and took a week to get sorted.

things to look for

tyres, any sign of wear at all

sterring wheel, if not stock

make sure the places acually knows what size rotors your brakes are supposed to have

any body damage that may have taken place during shipage, look underneath the body

robin once u have it complied i know a place where u can get a good RWC from... they dont try and rip u off like everyone else

burkey - dont worry mate.. u will learn to ignore his ranting

lol who cares... shut up denham and let him get a cat :)

dont listen to denham blackrobin... no one else does ;)

what does a radiator air guide do again nark? divert air AWAY from the radiator hey? :)

We all know that blackrobin is gonna go back to the cat that came on the car from japan after the rwc ;)

what does a radiator air guide do again nark? divert air AWAY from the radiator hey? :)

We all know that blackrobin is gonna go back to the cat that came on the car from japan after the rwc ;)

i didnt say it diverted it away u idiot... i didnt see the point as air was gonna get to it anyway.

anyway... just get a catco.

Back to square 1...

Failed my RWC today + still have no Engineering certificate also... my Registration was booked in for tomorrow. Not going well at the moment.

Driving the car with the standard feels like I got BIG MUMMA LISA is sitting in the back seat and they also chucked on a resinator about the size of 3 melways stacked on top of each other.

Inark.. I will send you a PM for the roadworthy place.... this list was given to me by RWC place to get fixed / looked at.

External wastegate

Drilled rear rotors have hairline cracks (common for drilled rotors yeh?)

Turbo Timer (easy fix)

Horn (because it was stolen by shipping co. - also easy fix)

Battery clamp (original battery went flat and could not hold a charge so bought a new one, smaller - easy fix)

Tank exhaust sheild to close to my milo tin (easy fix)

I pick the good ones don't I...

Thanks for your help and advice so far... I'm starting to hate my car and I've only driven it about 45km TOTAL.

Back to square 1...

Failed my RWC today + still have no Engineering certificate also... my Registration was booked in for tomorrow. Not going well at the moment.

Driving the car with the standard feels like I got BIG MUMMA LISA is sitting in the back seat and they also chucked on a resinator about the size of 3 melways stacked on top of each other.

Inark.. I will send you a PM for the roadworthy place.... this list was given to me by RWC place to get fixed / looked at.

External wastegate  

Drilled rear rotors have hairline cracks (common for drilled rotors yeh?)

Turbo Timer (easy fix)  

Horn (because it was stolen by shipping co. - also easy fix)  

Battery clamp (original battery went flat and could not hold a charge so bought a new one, smaller - easy fix)

Tank exhaust sheild to close to my milo tin (easy fix)

I pick the good ones don't I...  

Thanks for your help and advice so far... I'm starting to hate my car and I've only driven it about 45km TOTAL.

I still have a 3' stainless steel cat in my wreck i think, u can have it for cheap. :uzi:

DIY = $80  but still i have to double check if it still there or not. I should.

Find out...

A. 3"

B. If you still got it, condition... pfft... I will probably gut it anyway.

I will DIY if you can let me konw A & B

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...