Jump to content
SAU Community

Recommended Posts

Thanks munch, i know the stock quarter times on a stock 33 gtr are 12.6, and a stock rs260 is 12.9, so there not alot slower for the weight difference, but with my exhaust mods and double the stock boost i would hope to see some improvement over stock power outputs. Any power listings for any of the high power jap cars always seems to say 206, which ive been told is an understatement even from factory, thats why i wondered what an accurate guess might be. I need to find time to get to a 4wd dyno, but as far as i know none are on my side of town. Can anyone suggest anywhere with a reliable 4wd dyno in adelaide?

The "stock" R33GTR is somewhat more "stock" than the 260RS. The 260RS has better exhaust from what I have seen and runs a coupla psi more boost.

:) cheers :D

Edited by Sydneykid

what type of dump pipe are you running? split,blended,or std? what else is done to the car?

where it runs really rich up top would make sense if you have an atmo BOV,and the majority of the curve makes sense if it's a std ecu on a car with the usual mods (exhaust,FMIC,etc).

mine has an exhaust,pod,and boost controller,and it doesn't run quite as rich as yours does,and makes more power. I would put it down to the intercooler,and any differences in our exhaust systems,particularly if you run a blended dump pipe,as they tend to run richer on cars with std ecus.

Justin...

andy, can you list the mods. looks like the ecu is hitting R&R.

fergo, what difference would an atmo BOV make on WOT? as i understand it'll run pig rich when you close the throttle but i don't understand why it would run rich as you have described.

you know u need that powerFC now....

any ideas why my air fuel ratios are so rediculous?

I thought you got a new AFM? And it cured it.

I've just run two tanks full and averaged 151/2 per 100. Mostly tip toe stuff, but I live in very hilly area.

Got a Dfa to put in and thinking wide band O2 and after you mentioned AFM was considering that also.

Now i'm confused

Remember I'm new at this.

Edited by 66yostagea

i thought it was fixed after i changed the AFM but i think it was just a case of heaps of highway km's and mostly babying the car when i drove it during that tank of fuel.

mods are;

boost controller set to 10psi

GFB Stealth FX BOV

Front mount intercooler

split dump/engine pipe

5" catco metal inside cat with 3" reducers

BLITZ NUR Spec cat back exhaust

K&N panel filter

yeah i know i need it, but im a long way off from being able to afford it.

fergo, what difference would an atmo BOV make on WOT? as i understand it'll run pig rich when you close the throttle but i don't understand why it would run rich as you have described.

that's exactly what i was referring to,right at the very end of the curve,where it the power tapers off quickly and it dips mega rich. he's lifted off the throttle at that point,and the bov has vented,causing it to sink into the 9's for mixture.

I agree,it needs a power fc to lean it off safely.

Justin...

HOLY RICH AFR'S Batman! Wow!! I though a jaycar AFC thingy could fix that, or something like an SAFC(II)??

Why go out and spend big on a Power-FC when I would've thought a SAFC could do the same job and a quarter of the price?

My AFR's are that rich or worse when I did Dyno full power runs. My car is standard, but I was running 'high' boost mode all the time. My max power was up closer to 7000rpm though, not 4500rpm. And my car uses obscene amounts of gas. I've got a wideband AF setup to install and get my head around exactly what my 'standard' mixtures are doing. If I run more boost, it misses when it hits 9psi, but I know it'll be 10:1 or so around there, so maybe its a rich misfire. Shouldn't be detonation I only run 98octane and 9psi so it would be hard.

Will be very interested to log some driving with the Innovate LC-1. Does it seem lots of Stagea's are this rich? Like 10:1 at top end. Nissan wouldn't do that, its outside all tuning theories I'd think.

Does it seem lots of Stagea's are this rich? Like 10:1 at top end. Nissan wouldn't do that, its outside all tuning theories I'd think.

At standard boost they are rich (11 to 1)

Turn the boost up a bit and they go richer (10 to 1)

Turn the boost up a lot and they go megga rich (9.5 to 1)

Then they go R&R mapping (9 to 1)

It's normal, that's the way Nissan tuned it with safety in mind.

:nyaanyaa: cheers :laugh:

At standard boost they are rich (11 to 1)

Turn the boost up a bit and they go richer (10 to 1)

Turn the boost up a lot and they go megga rich (9.5 to 1)

Then they go R&R mapping (9 to 1)

It's normal, that's the way Nissan tuned it with safety in mind.

:nyaanyaa: cheers :laugh:

Great Info!! Thats put my mind at ease, could the 10:1 cause a miss do you think? It works through it ok and rpm continues to climb, but I guess this could be as boost is dropping back to 7-8psi(due to pneumatic boost controller).

What does R&R stand for?

apart from the obvious, is there any difference between tuning your stag on a 2WD dyno compared to a 4WD dyno?

how do you plan to tune on a 2wd dyno,when the car is 4wd? pulling out the relay will burn out your transfer's clutch packs. I wouldn't recommend that.

Justin...

p.s. Wolverine: because the power was already tapering off. no point in going any higher if it's making less power.

Edited by fergo308
  • 5 weeks later...

Hi All,

I have 1997 RS4 (Auto)

- GCG HiFlow Turbo

- Hybrid FMIC

- Walbro 500hp intank Fuel Pump

- Turbosmart Eboost EBC 7psi 10psi 14psi

- Turbosmart FPR (Street)

- K&N Pod with cold air induction

On a Dynodynamics 4WD Dyno @ APC in Brisbane

203 kw @ all 4 wheels! 3rd gear :sorcerer:

made roughly 100kw @ 3000rpm :happy:

made roughly 200kw @ 6000rpm :)

Have no issues with factory ecu (maybe its chipped?)

Dont think I will bother with piggyback or aftermarket ecu's

The guys at APC rekon with a Haltech I could get in the 250AWKW+! :laugh:

Need about $3k for that though....

Wade

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...