Jump to content
SAU Community

Getting rid if some stuff...check it out


Recommended Posts

*HKS Graphic Control Computer--(HKS PFC F-CON) and wiring

http://www.hksusa.com/products/?id=688 ...........$400

*HKS Injection Pulse Monitor (good with the F-Con).

http://www.hksusa.com/products/?id=729&rsku=0 .........$150

OR BOTH for $500

*Genuine 33 Vspec standard shocks..........$350

*824 pages of photocopied GTR manual..........$30SOLD

*Genuine 32 GTR side skirts (plastic) with spats (or whatever you call them), could use a paint but I guess youd have to if you didn't have a grey car anyhow..........$350Back on the market thanks to tire kicker

*1 orange GTST indicator, leftover stuff from previous car..........$15

*Pair of orange GTR side indicators..........$30

*Prefabricated 1 cubic foot 12" sub box..........$15

*2 x framed pics of Skaifes no. 2 wining bathurst GTR

1 in 34 x 24 cm frame and 1 in 30 x 40 cm frame..........$35 eachSOLD

*Standard GTST BOV..........$15

*Blitz Badge..........$20

*Carrozeria (jap pioneer) 6 stacker and head unit..........$50SOLD

*QLD personalized plates

40RCN, silver on blue..........$1000

GTR44, silver on black..........$470

51CKR, silver on purple..........$650

[email protected]

Link to comment
Share on other sites

About the HKS GCC:

The GCC is an electronic tuning component designed to add additional flexibility to the fuel tuning capabilities of the VPC, PFC F-CON or F-CON S. The GCC simply plugs into either the VPC or F-CON harness and allows the user to further adjust the air / fuel ratio at five specific rpm points. Each five points offer an adjustment range of 16% rich to 12% lean, in 2% increments, of the base value. Four different selectable rpm ranges allow maximum rpm level flexibility when tuning the fuel curve. The GCC will interpolate, or average between the rpm points of adjustment to ensure a smooth transition of fuel delivery throughout the RPM band

and the IPM:

The HKS Injection Pulse Monitor, or IPM, is an electronic injector duty cycle monitor and display unit. When tuning a fuel system with an HKS Graphic Control Computer (GCC), VPC, F-CON, AIC III or Super AFR, the IPM is essential for determining the remaining fuel injector capacity. With the supplied wiring harness, the IPM plugs directly into any vehicle equipped with an HKS PFC F-CON (Programmed Fuel Computer) or can be wired directly into the stock ECU harness of any electronically fuel injected application. When used with the PFC F-CON, the IPM will show the difference between the factory specified pulse width vs. that of the HKS F-CON pulse width on its dual level LED display. When used with the stock ECU, two separate injector signals can be displayed on the dual level LED display, either two stock injector signals or one stock injector signal and one signal from an AIC injector. As the injector pulse is increased via fuel controllers, the IPM will display the new injector duty cycle in real-time. In addition to monitoring, the IPM incorporates an audible alarm that can be set to trigger when any pulse width from 50% to 95%, in 5% intervals, is reached

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...