Jump to content
SAU Community

Recommended Posts

Hey all,

I'm looking at getting a power fc and boost controller, was originally thinking AVCR (or possibly go cheapo 2 stage tubosmart controller), but i've seen advertised on the nengun site another apexi boost control kit designed to work with the power fc. Apparently it works using the same solenoid as the avcr.

Has anyone used one of these or heard any stories about it?? It works out a fair bit cheaper than the avcr.

http://www.nengun.com/product_info.php?cPa...2a2303597da2a9d

If anyone has heard any stories about these it would be good to find out. If they suck i'd prefer to spend an extra few hundred for the avcr.

Cheers :cheers:

Link to comment
https://www.sau.com.au/forums/topic/52762-power-fc-boost-control-kit/
Share on other sites

Its exactly the same solinoid, Just the avc-r has extra functions that you carnt access on the Power FC ecu. Eg: Start Duty, F/B Speed, Learn Gear, RPM based Boost etc.

The power fc will only let you control boost pressure and not use any of thoes other functions. - So if you just want to control boost buy the solinoid (If you have pfc) but if you want to play with the extra functions go the avc-r.

:cheers:

Jun

Bit of a highjack so sorry in advance but if you already have an EBC (i have a Blitz DualSBC), it is worth going the proper boost control kit with a PowerFC? (I have one of these babies due to arrive any day now). That is, should i sell my current EBC and get a proper solenoid for the PFC?

Yes i can dammage it. The more boost you run the hotter the exhaust wheel gets and the stock turbo exhaust wheel can only resist a certain amount of heat before it ends up into your cat.

AVC-R is a very good boost controler, Its not hard to use once you get the generel idea,

I havn't used the HKS evc myself but i've herd they are good aswel.

:wavey:

Jun

hmmmm don't really want spikes, stock turbo so if i get bad spikes can it damage it?? (say if i'm running like 10-12 psi and it starts bouncing to 14-15psi or something???)

i heard avcr was good?? would a hks evc be better??

i'm not trying to say that AVCRs are bad dude.. just at higher levels ie 1.2bar and above ... theres a tendency to spike .. on SOME applications ..... i'm still going to buy one regardless personally and i intend to run somewhere up to 1.2bar all going to plan.... plus it adds more bling to your interior lol

HKS EVC are very good units too .. but u get what u pay for in that respect

alot of tuners swear by Greedy Profec B .. the ole school black...

One of my mates used to run the Power FC with the boost control kit. He didn't like it tho and preferred a separate EBC because changing the boost properties was extremely tedious; it was accessed through several menus.

One of my mates used to run the Power FC with the boost control kit. He didn't like it tho and preferred a separate EBC because changing the boost properties was extremely tedious; it was accessed through several menus.

Sorry I don't understand, on the Commander it is under settings and boost control. I leave the Commander in that screeen and set the boost control up on the dyno and then on the road. I have no idea why you would want to hop in and out of the menus all the time to change the boost settings. I mean how many times are you going to set up the boost control, in 3 years I think I have done it twice.

Maybe it's me, I simply don't enjoy playing with the "toys", I actually prefer to drive the car. :(

One of my mates used to run the Power FC with the boost control kit. He didn't like it tho and preferred a separate EBC because changing the boost properties was extremely tedious; it was accessed through several menus.

The power FC boost contoller kit is extremely easy to set up. I managed to set up 4 boost settings in about 30 minutes with the help of my girlfriend.

  • 7 months later...

Hey guys sorry for digup of an old thread. For those that have this kit, I've noticed the powerfc has one aux plug in for the boost control kit, and it looks like its 5 wires. it appears the avcr solenoid is 2 wires and the pressure sensor is 3 wires. does this sound right so far? I would like to hook up a map sensor and plug it into the same loom but not actually use the avc-r solenoid. I already have a boost controller but would like hand controller to show boost pressure under monitor. So I figured using the sensor harness and map sensor (that the powerfc boost control kit uses) should achieve this. Does this sound logical? Nengun have the part numbers for the boost control sensor harness and map sensor for about $175au.

My max boost level control is via my right foot.

mine too. With a powerfc, you are stupid to think that you can just "give her a bit more boost"

As soon as you do that, it leans, and goes bang. Fuel Maps do what they are told, and nothing else. I really wonder why people have this need to Have "hi and low boost"

To me, its High and low WANK. If you need a low boost setting to drive slower, you shouldn't be on the road.

Wasn't aiming this at anyone, just my opinion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...