Jump to content
SAU Community

Recommended Posts

I've got an apexi timer, i found that its just handy if you don't like sitting in your car waiting for it to circulate the oil. Does anyone know which wire in the r32 gtst is for the air/fuel ratio? I don't have this feature hooked up yet coz the guy who installed it didn't know where it is.

Link to comment
https://www.sau.com.au/forums/topic/52929-turbo-timers/#findComment-1040133
Share on other sites

Personally I reckon a turbo timer = a waste of time and money. What about the rest of your car? Have you got a brake timer? Or a gearbox timer? How about a diff timer?

Chances are if the turbo needs cooling down, then the rest of the car does as well. How much cooling actually goes on with no air going through the engine bay, sitting there idling away? I just do an extra lap of the block and cool the whole thing down. Plus turbo timers a great place for the car thieves to hook into your ignition circuit.

My 20 cents worth :(

Link to comment
https://www.sau.com.au/forums/topic/52929-turbo-timers/#findComment-1040175
Share on other sites

True, but the exhaust manifold/turbo suffers alot more heat than brakes and differential. If brakes and diff's needed such devices to cool down then every performance car would have them, including N/A vehicles.

However For the record I personally do tend to take the last couple of kilometres easy to cool these other componants down after more 'spirited' driving.

Link to comment
https://www.sau.com.au/forums/topic/52929-turbo-timers/#findComment-1040488
Share on other sites

i have one and never use it.

i was under the impression that std turbos dont need one to cool down cause thats what the water lines are for. so if you have an a/m turbo with no water lines then you may need it. but you could just drive in vaccuum, not boost, for the last few minutes before you get home.

Link to comment
https://www.sau.com.au/forums/topic/52929-turbo-timers/#findComment-1042214
Share on other sites

True, but the exhaust manifold/turbo suffers alot more heat than brakes and differential. If brakes and diff's needed such devices to cool down then every performance car would have them, including N/A vehicles.

However For the record I personally do tend to take the last couple of kilometres easy to cool these other componants down after more 'spirited' driving.

As do most owners of performance cars. That's the problem with turbo timers, people think that it saves them from cooling everything down, after all if the turbo's OK....... :Pimp:

Link to comment
https://www.sau.com.au/forums/topic/52929-turbo-timers/#findComment-1043526
Share on other sites

Just look up the wiring diagram that came with it. Its dead simple. I think it may also be on the Apexi site.

I've got an apexi timer, i found that its just handy if you don't like sitting in your car waiting for it to circulate the oil.  Does anyone know which wire in the r32 gtst is for the air/fuel ratio?  I don't have this feature hooked up yet coz the guy who installed it didn't know where it is.
Link to comment
https://www.sau.com.au/forums/topic/52929-turbo-timers/#findComment-1043535
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...