Jump to content
SAU Community

Recommended Posts

Ok,

I've got an Auto Gts-t

Sometimes when cruising along and i want a sudden burst of power, i get a minor kick upto about 80 and then the car seems to plateau abit and not push really that hard... even with the boost guage reading full boost.

This is really getting annoying because i like my power on tap and at the moment it doesnt seem to be flowing too well.

So, what do you guys do when driving your autos and want some sudden kick? Do u press the overdrive button to turn it off? How do u drive the autos for maximum power/performance? *Edit* Or do you manually shift it up thru the gears?

Either i cant drive an auto properly *gasp* or there might be something wrong with my car =(

Just another thing, why does my car perform better when the engine has just been started and performance appears to drop after the engine warms up... this little quirk is really buggin me... possible hot air induction the problem?

Anyway, thanks for your input guys~!

Link to comment
https://www.sau.com.au/forums/topic/53376-how-do-you-drive-your-auto/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

if you have been stopping and starting, and you notice the car gets sluggish, its nothing to worry about, it is the intercooler getting and staying hot, causing the intake temp. to rise and your car to become a bit sluggish. also if you have an un-partitioned pod filter it would make things worse.

about the sudden kick issue.. when i want to have a bit of fun in an auto (ie. when driving my parents car) i just leave it in 1st or second gear :D

I don't have an auto - sports cars shouldn't have autos, IMO - but when I do drive an auto, it gets driven like a manual, ie select the right gear for the current situation; so at red light, select 1st gear; turning corner, shift back to 2nd; etc.

I have an auto GTST and i have noticed all of the same things you have, im not too sure if putting it into 1st or 2nd damages the engine, but it sounds good! I was in the country a while ago and i was driving it at about 140kph and it dropped a gear and just flew and i didnt do anything to cause it, i have to admit it was a bit of a rush, so im not too worried!

Rach

are you sure over drive is off when it drags at 80? if its on, it likes to cruise at 80 in mine. irks me as it should cruise 100km like a normal car.

leave the thing in drive, and be sensible. last thing you want is for the auto to make decisions while you are playing about.

if ya going to do stupid shit, leave it in 1st, and wear any consequences, fuel ecconomy/tyres etc.

make sure snow isnt on etc.

If I remember rightly the auto ecu has a bit of learning capacity. If you drive around like a toad, it will shift gears like a toad. It learns that you like to drive slowly, gently and softly so it changes up gears early and doesn't hold the rpm. It takes a bit of a thrash for a few minutes for it to unlearn. I also understand that Power mode turns off the learning and stops the slowly, gently and softly.

Hope that helps:cheers:

Yes I have buttons.

Was just thinking the 34 ecu may have a learning mode/power mode thing like the 33 has.

But thinking about it I guess you don't need it with tiptronic.

Is there any difference power wise letting the tranny shift auto vs tiptronic? Other than the obvious you can rev it out further in tiptronic.

I dono how the box is with the GTS25t but I wouldn't shift gears manually unless the box is designed to be driven like a manualised box and has a shift kit.

If you wanna get speed out of it etc learn how it behaves and adjust for that (ie. being a driver).

Kitten_89:

Im sure glad my car isnt the only one performing like this :P

I noticed that while cruising, pressing the Overdrive button off will cause the car to drop to 3rd and pick up fairly well :P

I guess i sorted that little problem out...

SydneyKid:

I always leave it in Power mode (unless its wet) so i guess the ecu's learned shift habits really wouldnt be the problem.

Now for that crappy stock cooler...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...