Jump to content
SAU Community

Recommended Posts

Dunno if this has already been mentioned, but:

Spotted Kylie's (StageaGirl) car in a small photo in the latest HPI magazine (No. 76, page 48), lined up against a generation 1 Liberty RS Turbo at Drag Warz...

Here I am :D hehehe I made it in a magazine :rofl:

:laugh: And don't ya's forget it :)

:P :P :D :D :D

i was in a silver s1 near abernethy road on great eastern highway and spotted the blue s2 with LTD plates.

Gee you can't go anywhere!! err it does kinda stand out though eh!

See you Sunday on the Cruze I hope.

spotted a silver S1 at cnr Rockingham Rd & Carrington St lights this arvo. Heading SE. Just saw it at the last minute, sorry didn't have time to wave. I was in Bayside Blue S2.

That might have been me heading to the grandparents to pick up my daughter.

I also spotted a silver series 1 with aftermarket rims in the carpark at sizzler in Riverton on friday night

Spotted: Dark Navy Blue S1 in New Zeland. It was on last nights Serious Crash Unit, right near the end when the people were standing next to the road they had the accident on, and it drove past I was like :w00t: THAT IS A STAG! :)

Spotted: Dark Navy Blue S1 in New Zeland. It was on last nights Serious Crash Unit, right near the end when the people were standing next to the road they had the accident on, and it drove past I was like :laugh: THAT IS A STAG! :laugh:

Haha, I saw that too but I wasn't sure if it was or not. good eyes

I keep spotting the silver stag around woodbridge area here in Rockingham... always the same peeps in the car, black rims with chrome dish... I want them :)

Will one day hopefully stop and say g'day... if you lurk on here, join up and say hi... come along on a cruise. Great bunch of people, if I do say so myself :):(

Kylie :yes:

spotted a blue series 2 carrying a big box on roof racks lol goin down Maroondah Highway in Nunawading about 2 oclock,

I was goin the opposite way in my Stagea i beeped the horn and gave u a wave but u didnt notice :mellow:

There musnt be many over my way in perth. im yet to see any other than a few at the car yard

Where abouts are ya? N or S of the river?

You should have been at the cruise yesterday, you would have seen plenty!

i hardly ever see stageas, not like you peeps in perth anywayz.

Neither do I, but don't forget, Andy, that Perth city is smaller than Parramatta, so comparing Perth metro to Sydney metro is like chalk and cheese...

There's a higher concentration of Stageas over a much smaller area in Perth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...