Jump to content
SAU Community

Recommended Posts

Spotted RBPOWA at RE Custom's today when i was dropping off my Stag.. tuff look Stagea, R34 GTR Wheels and nice hidden cooler :P

hey cheers man .... see your sitting out the front just before .... all done ? AWD working ok? ... nice touch with the duct tape too hehe ... should hunt down the front bar that was on it before you got it ... that looked nice as man.... did they sell it to you with air mushroom on it ? ... with RWC ?

hey cheers man .... see your sitting out the front just before .... all done ? AWD working ok? ... nice touch with the duct tape too hehe ... should hunt down the front bar that was on it before you got it ... that looked nice as man.... did they sell it to you with air mushroom on it ? ... with RWC ?

Yeah my front bar is screwed!.. they chopped the hell out of that one to make it fit over the cooler which took all the strenth out of it and stress from bumpy roads ect made it crack all the way through! :D.. I've got a new Nismo bar for it just gotta get my new cooler, get the bar sprayed and fitted.. Old bar was an ABFlug bar, contacted ABFlug in Japan and they said it would cost me nearly $2000 for the bar and freight to Aus.. Brad is still working on the AWD just hopeing its gets sorted befor i drive the car through the front window of the place i brought it from!..

Edited by SHIZNT
Yeah my front bar is screwed!.. they chopped the hell out of that one to make it fit over the cooler which took all the strenth out of it and stress from bumpy roads ect made it crack all the way through! :P.. I've got a new Nismo bar for it just gotta get my new cooler, get the bar sprayed and fitted.. Old bar was an ABFlug bar, contacted ABFlug in Japan and they said it would cost me nearly $2000 for the bar and freight to Aus.. Brad is still working on the AWD just hopeing its gets sorted befor i drive the car through the front window of the place i brought it from!..

bloody shitty car yard ... u know who it is .. we just cant slag off ... did u see my cooler ? did u look under my hood ? its a perfect fit .... justjap.com .... HPI $799

hope u got a discount on your car for such a shitty replacement bar ... should go there with the quote from ABflug and ask for a refund ... if not ... things happen :S

bloody shitty car yard ... u know who it is .. we just cant slag off ... did u see my cooler ? did u look under my hood ? its a perfect fit .... justjap.com .... HPI $799

hope u got a discount on your car for such a shitty replacement bar ... should go there with the quote from ABflug and ask for a refund ... if not ... things happen :S

Yeah trust me i got a discount after i went to inspect the car after the repairs and i seen the front bar the way it was.. and after all this crap has started with the car all they can say is "Oh thats no good".. I saw your cooler its tucked away very nicely.. i thought your car was stock apart from the wheels until i had a closer look lol.. didn't get to look under the hood, i only had time to drop the car off and jump on a train back to the city for work..

Yeah trust me i got a discount after i went to inspect the car after the repairs and i seen the front bar the way it was.. and after all this crap has started with the car all they can say is "Oh thats no good".. I saw your cooler its tucked away very nicely.. i thought your car was stock apart from the wheels until i had a closer look lol.. didn't get to look under the hood, i only had time to drop the car off and jump on a train back to the city for work..

oh shit no spare car ... i feel sorry for those guys who leave there gtr's there for months getting rebuilt .... no spare car .. i just work 10mins down from them so its all good .. im there a fair bit .. my mate owns the GTiR there

hey ppls i'm a stagea virgin

can you give me an idea on how much these are worth ????

11998 Stagea Rs 260 Autech Wagon, 102000kms, full GTR wagon pearl white

hi and welcome cheeky, question should be in general topics but it,s pretty easy to get an idea of prices, check normal avenues like drive.com, cars guide etc also check importers, j-spec, prestige etc, you will find 260rs prices all over the shop from as low as $25k to as high as $35k just like r34 prices 99-2000 models from $20to $30k(buy the way do you have a 260 ?)

hi and welcome cheeky, question should be in general topics but it,s pretty easy to get an idea of prices, check normal avenues like drive.com, cars guide etc also check importers, j-spec, prestige etc, you will find 260rs prices all over the shop from as low as $25k to as high as $35k just like r34 prices 99-2000 models from $20to $30k(buy the way do you have a 260 ?)

hey leetom

dont have one yet going to look test drive tomorrow

very excited just imported and complied

On sats,I dliver furnitures,and today I delivered to a bloke in coburg,that has a white pearl 2001 stag rs !!!!!!!!!!!!!!!!!!!

very nice ride,with front mounted intercooler +etc

It has the carbon fiber gauge cluster!!! :3some: .

We talked that would be good to have a stag ride here in melb one of this dayz... :D

I was looking for some data about a turbo timer on the net and i cross my way with this ...

Take a look at this rides...

Look they are a couple of stagea's clubs in Japan(think one of them is people with dolphin bodykits...)

love the pic with the mount fuji at the back...

post-52922-1220781706_thumb.jpg

post-52922-1220781740_thumb.jpg

post-52922-1220781763_thumb.jpg

post-52922-1220781784_thumb.jpg

post-52922-1220781811_thumb.jpg

post-52922-1220781834_thumb.jpg

i got a apex-i pen style turbo timer .. has volter meter o2 sensor and a/f reading on it ... all works good easy to hide also .. car thievs look for them cause it leads back to the main ignition wire then boom car gone :D just a tip i recived of my mech !

Edited by RBPOWA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...