Jump to content
SAU Community

Recommended Posts

Maybe I just wanted some attention ! ! :(

Cheers guys, I've sent Shell a PM (previously) and I will fill that form out as directed. Hopefully a member by next month :D !

Edited by HelgaR33

Peeps, I need your 2 cents worth..

As you know, I'm selling the Stagea. It's currently advertised for $14800 ($14500 for SAUers ), but have offered it to this guy for $14000. He has turned around and offered $13k to take into account the money involved to repair minor scratches on the car (no panel damage, just paint damage <$800 work), regas the a/c, manage a couple of leaks like a leak on the tapper cover gasket..

My first and only reaction is to reject the offer - and I doubt that I will change that. My opinion is that for cars like ours that are pushing 15-20+ years there are going to be these imperfections.

My question is; how much do or would you reduce the sale price to compensate for the work involved to get these things fixed?

In my opinion, all potential buyers do this as part of the human psych. More prevalent in other cultures, to put it diplomatically.

These same people will boast to their friends what they ended up buying it for.

Plus if you do sell for less than you wanted - we would normally cite why we did so. "Oh it had a few imperfections" ... makes us feel good for underselling it's true worth.

As is said time and again it is worth only what we sell it for.

Now you have advertised it for a price, and you have discounted it since. Stick to your price point.

You have already taken into account what needs doing and it's cost.

A perfect car demands a premium price.

How does it compare to others in the market?

I'd say $14,000 is the sweet spot and will sell for this amount :)

Thanks sin, I appreciate that. Hahah I need the confidence boost.

I am selling it at a higher cost than some in the market, but only due to the variety of additions and basic mods already checked off the list.

I saw 2 stags advertised.

one for $15,500 with almost the same KM's and not as nice as yours

one for $13,000 with twice the KM's and not as nice as yours.

So yours is better and in between both of the above. Hence the sweet spot comment.

No one is willing to spend, unless on a real bargain basement price, and it's been like this for a couple of years now.

as for paint imperfections I'd like to see what we can be do about that.

Black mate everything shows up - you know that :P

Hard colour to maintain.

Just thought I'd potentially annoy Anthony a little bit by letting him know I took my mate's '12 Kawasaki ZX10R for a short ride from the Costco carpark to Caltex in Hume yesterday.

I'd normally say something like "all I have to say is X", but truth be told that experience temporarily left me speechless....hahaha

Nah seriously, all I DO have to say is dear sweet f**king jesus. That machine is an absolute weapon. The power is has is unbelievably obscene. I gave it a tiny squirt ONCE in 2nd gear off the lights where Tharwa Dr crosses the highway and it absolutely blew my pants off - AND I DIDN'T EVEN TAKE IT ABOVE 6000rpm!!!!

I don't necessarily see the point in owning such an overpowered bike, but my god is that something to be experienced. I highly recommend taking one (or a similar bike) for a test ride the moment you get the chance (and/or are legally allowed to).

Its a bit much to get used too hey! haha its like :woot: then :O too fast!

And on those big bore bikes it feels like a train engine with all that torque.

When you own one your brain gradually becomes able to handle it.

Its weird how things look at those speeds, its like as you accelerate, space warps around you.

Yeah ive ridden an older model one. I could respect the power but it scared the absolute shit out of me. Don't want to die lol. Don't know about you Troy but im not an overly large person (67kg's) last i checked. And pretty much bang on 6 foot. As great as the 1000CC bikes are they are just too large/powerful for someone of my size.

I remember Nick (verms) saying his zx10r would do 180ish in first. they are crazy bikes. And then kawasaki decided to make the zx14r.

im looking at getting an R6 at some point in the next month or so. Im much more of a Yamaha man. When the car is finished... (good joke). But srsly its going in on Wednesday for its last bit of work till i have a house.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...