Jump to content
SAU Community

Recommended Posts

heheh not yet.. I'll keep thinking. :D

Sure the 044 may have constant voltage but what happens at night when the lights, wipers and all the accessories are on?

When the fuel pump drops slightly in voltage its flow also drops dramatically.

For example a Nissan GTR pump that receives 13.5volts will flow ~250L/P.H.

Bump that voltage up to 16.5v and it will flow nearly 340L/P.H.

*Apparently* As an example to help clarify.

There are fuel pump 'Boosters' that feed a constant 16v or what ever you set.

I'm sure every one has seen the voltage drop when you crank up a stereo.

  • Replies 196
  • Created
  • Last Reply

Top Posters In This Topic

I can personally vouch for Tristans car: it ****ing moves - ive driven it both with its old 2530, and its first tune with its GT30 - and the thing is a weapon. I went for a drive in it on thursday night with its new tune , and all of a sudden it is a lot , and i mean alot quicker then it used to be. so its making more power. kighting up r comps in 4th onto boost on 50% throttle is a good sign of power. ill be driving it again soon to confirm this alone.

now, tristan knows it doesnt make 511 on a real dyno. im currently holding his dyno chart from 5pm , and it states ***rwhp, in shootout. this is its true power, tristan will host it tomorrow so i wont be giving the number away

tristan is a personal friend, so yeah im biased. i dont see the need to attack him - it makes power, its yet to make a time , so wait , and see how he goes. he hasnt come on here pulling his knob over his power, he has answered every question honestly, so please lay off.

as for the rest of the shit fighting, go for it. i love being reminded of what primary school was like.

all i hear is wah wah wah im a dirty tramp

tristans car is the fastest car ive ever been in. It has bulk power. If you feel you need to get on the net and debate about what it has and hasnt got, ure quite simply a penis...

Props to the man for making whatever, props to SST for building what seems to be a great motor. Now just run an 11 u poofter :(

j

Ok, enough is enough.

You guys keep it on topic & stop attacking/baiting each other or im going to hand out warnings with no hesitiation.

There is always a bit of passion in discussion and thats fine. Just keep it clean and nice everyone.

now that said...

I have a few inter-related questions though that isnt answered and is bugging me flat out

All i want is it to be answered, i really dont give a stuff about what injectors :(

The turbo is a GT30 correct, and to be a phat curve like Pauls it must be running a .82 rear housing correct? And that would then have it rated to 600HP?

1stly 16psi made 415rwhp (309rwkw)

and then

2ndly 20psi made 511rwhp (381rwkw)

How can 4psi make an extra ~100hp/75kw still running BP ultimate as a fuel???

Even if the turbo was a hybrid/special GT30 of somekind i cant see any turbo making that much more from a lowly 4psi

Maybe 10psi and some C16 :D

i'm the other guy that was there for the dyno run this arvo.. i was the tool holidng the video camera.

like tomj said, Tristan knows the 511 figure is incorrect, and also like tomj said, the thing effing moves, whatever they're doing down at SST is awesome stuff and no one should be bagging them just because you don't know how in the hell they hang it all toghether.

the video will be up asap to give you propper proof of the figures, and yes i think i'm allowed to say that more than one run was done, and all gave more or less the same result.

From what i read lagwagon is commenting on the cars you tune and use in your arguments. So you call him cheap?

-rob77 had stock pistons thats why it blew. nar sorry there are may people running stock pistons that make big hp but they dont push the the stock injectors.

i belive magic 1s 414rwhp i saw it run on the dyno dynamics, but i can also see how it can be done. Cams would help a heap because there increasing power with out heat so the sock injectors dont need to have such a good spray pattern to get a cool clean combustion.( Which happens with large fuel reg presure) forged pisstons again are up for a bit more punishment then the stock. An efficent turbo at a bar. and a tune that would sacrifice power down low for more up top will give you a dyno queen car that pulls some nice graphs but embarrassing track time for the power.

i dont mean to take anthing away from the car its nice just set up differnt to the way others like it each to their own, id love to own it. As you said steve he was setting it up for the dyno comp, he wanted 500rwhp and you got it.

my 2c

From personal experience I made 250rwkw with a bosch Motorsport pump std fuel pressure rail and std injectors. A/F ration was 12.3:1 and any increase to the fuel map made no change to the mixtures. My engine lasted a couple of months and went bang on a cruise without octane booster...as you would expect. I rebuilt the engine and again used standard injectors this time with a nismo adj fuel reg. i found increasing fuel pressure did the trick however my mixtures were never stable. I was told and soon saw on a flow bench that increasing fuel pressure past 10% caused the injectors spray patterns to be distorted which in turn caused uneven burn between cylinders. Time went past and I picked up some 264 cams from BUSTER and installed them. I made 13rwkw more with an up in fuel pressure but stangely enough my mixtures were constantly stable through 5 odd dyno days. The only difference being cams which would tend to support RBVS's theory. I personally think the std injectors can flow quite abit more than 370cc however spray pattern is the first to be affected to the point of hydraulic lock and missfire. The cams enabled the effect of a distorted spray pattern to be reduced and engine life extended because of restabilising of mixtures...

goes to show cams could be a good investment if not purely sort for a power increase.

matt

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...