Jump to content
SAU Community

Pics of Millenium Motorsports dyno day 6/11/04


Recommended Posts

my passage made 142.5rwkw and 330ftlb torque.

gotta get my intercooler piping done properly and not completely botched up by 1000 misc pipings and connectors :) waaay too restrictive for the t3/t4 turbo... i was hoping for the 160-170rwkw mark, but yeah :(

still does 13's :(

was a good day...came in a bit late but its all good,..saw some cars from SAU...the white GTR which im pretty sure from MELV..must say...AWESOME car,.would have stayed to see it go on the dyno but had to head back to sunny coast for work.

also saw MSP51 which i believe was Erins...my car was silver R33 GTST the one with the GT stripes on it.

Just bought the car not very long ago..wanted to see how much power it has and was quite happy..although i expected more he he.

done 156rwkw set on 8 psi

only known mods were 3in catback,.trust front mount and hks pod.--> seriously have no idea what other mods the car has..that's all i know---> FOR NOW.

and its time for an upgrade.

that's a good power figure for 8psi i think personally.

GTR man give carlos from millenium a call on 3348 2755 and tell him you saw it in the dyno day pics and wanted more information on it. I'm pretty sure he refills them and he has the setup on his supra so he would know the costs.

Some power figures for the day

Neil in his black rb20det 180sx 190rwkw

Stu in his white sr20det 180sx 192rwkw

josh in his white sr20det sil80 190rwkw

Mase in the povvo onevia rb20det 141rwkw with a fuel/air ratio of 10.2 rich rich

Melv in his white GTR 307rwkw

jaqule in his blue 33???

nismo 33 in his grey r33 156rwkw

chick in a Silver Supra 295rwkw

Red r33 built by hardcore performance rb25det 421rwkw's on the giggly juice

Chris sr20det green silvia 133rwkw's with air/fuel in low 10's

Scotty in champaigne 180sx sr20det 135 with similar air/fuel

Honda Accord with vtec engine upgrade 101fwkw's (almost put rwkw!!!)

Beannie in his r31 passage 142rwkw's (you just beat me you bastard!!!! :)) (air/fuel issues also)

Clint in his s15 pulled 163rwkw's

Overall the dyno day was great but showed quite a lot of us that we need to look at aftermarket fuel management if we want to see some decent gains due to some really rich air/fuel mixtures.

Few boys found out they were running very lean also, which may have saved them a lot of dosh down the track.

that's a good power figure for 8psi i think personally.

GTR man give carlos from millenium a call on 3348 2755 and tell him you saw it in the dyno day pics and wanted more information on it. I'm pretty sure he refills them and he has the setup on his supra so he would know the costs.

Some power figures for the day

Neil in his black rb20det 180sx 190rwkw

Stu in his white sr20det 180sx 192rwkw

josh in his white sr20det sil80 190rwkw

Mase in the povvo onevia rb20det 141rwkw with a fuel/air ratio of 10.2 rich rich

Melv in his white GTR 307rwkw

jaqule in his blue 33???

nismo 33 in his grey r33 156rwkw

Silver Supra owned by a hot chicky with pink interior 295rwkw  

Red r33 built by hardcore performance rb25det 421rwkw's on the giggly juice

Chris sr20det green silvia 133rwkw's with air/fuel in low 10's

Scotty in champaigne 180sx sr20det 135 with similar air/fuel

Honda Accord with vtec engine upgrade 101fwkw's (almost put rwkw!!!)

Beannie in his r31 passage 142rwkw's (you just beat me you bastard!!!! :)) (air/fuel issues also)

Clint in his s15 pulled 163rwkw's

Overall the dyno day was great but showed quite a lot of us that we need to look at aftermarket fuel management if we want to see some decent gains due to some really rich air/fuel mixtures.

Few boys found out they were running very lean also, which may have saved them a lot of dosh down the track.

mase how accurate is that dyno? u reckon??

i always was estimating my power to be anywhere from 160-180rwkw, and to pull only 142 i was disapointed.

yet people i've been speaking to have been saying that if im doing a 13.71 @104mph 1/4mile time, then i should be putting out about 180rwkw to even pull the weight of the passage along to that time. also worked out it was 142rwkw and 447nm torque... thats alot of torque for so little 'power' isnt it???

whats everyone elses thoughts?

beannie, your power figure was severely detremented by your fuel mixture. Maybe seeing as we cleaned your afm, the computer hadn't readjusted itself or something and you were running richer than normal????

If the dyno was reading low by around 20-30rwkw's then neil would have pulled a 220rwkw's. Is this possible on stock injectors???

With the boost you were running and your fuel mixture, i'd say that would be a good contribution to your lower power figure, but on the other hand, i do think the results may have been slightly lower (talking 10rwkw's max) than a few others around.

Just my thoughts anyway.

cheers for the pics guys

beannie, your power figure was severely detremented by your fuel mixture. Maybe seeing as we cleaned your afm, the computer hadn't readjusted itself or something and you were running richer than normal????

If the dyno was reading low by around 20-30rwkw's then neil would have pulled a 220rwkw's. Is this possible on stock injectors???

With the boost you were running and your fuel mixture, i'd say that would be a good contribution to your lower power figure, but on the other hand, i do think the results may have been slightly lower (talking 10rwkw's max) than a few others around.

Just my thoughts anyway.

cheers for the pics guys

neil has pulled 220rwkw according to a post he made about the car...somewhere, ive seen it ... maybe not these forums, dunno... but yeah..

i might take it to a dyno dynamics dyno at a different place for a '2nd opinion' and see what i get... but honestly, i personally think its impossible for me to get a 13.71 pass on only 140rwkw in a car that weighs almost 1500kg :) we'll see...

Keeping in mind it is a dynologics dyno and not a dynonamics dyno.

They read differently. For instance, I got 198rwkw on matty spry's dyno and then went to all star tuning at northside somewhere and got 168rwkw.

So you figures were in comparison to everyone else on the day.

also saw MSP51 which i believe was Erins...my car was silver R33 GTST the one with the GT stripes on it.

Twas me :) Just a question, what do those japanese characters on the back of you car mean?

Keeping in mind it is a dynologics dyno and not a dynonamics dyno.

They read differently. For instance, I got 198rwkw on matty spry's dyno and then went to all star tuning at northside somewhere and got 168rwkw.  

So you figures were in comparison to everyone else on the day.

Twas me :) Just a question, what do those japanese characters on the back of you car mean?

Those Japanese writings means " Japanese women are hot " or rather " Asian chicks are hotter " --> something like that.

sweet hey ?

neil has pulled 220rwkw according to a post he made about the car...somewhere, ive seen it ... maybe not these forums, dunno... but yeah..

i might take it to a dyno dynamics dyno at a different place for a '2nd opinion' and see what i get... but honestly, i personally think its impossible for me to get a 13.71 pass on only 140rwkw in a car that weighs almost 1500kg :) we'll see...

I don't actually have a 220rwkw dyno sheet, that's just an estimate based on past tunes at PITS and other people's power there. My boost was down 1.5psi from the last time i had it dynoed as well. However i have run 114.6mph which is well above what 191kw could run.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
Ă—
Ă—
  • Create New...