Jump to content
SAU Community

Recommended Posts

Hi guys,

Does anyone have a custom boot install for an R33? I've got quite a few questions:

1) has anyone removed the spare and put the sub in there in fibre glass?

2) does anyone face the at the right side of the boot from the left side or vice versa and does this sound good?

How much does this cost?

post your piccies too

Cheers

Link to comment
https://www.sau.com.au/forums/topic/5537-question-custom-boot-install-for-r33/
Share on other sites

I don't see a reason why you couldn't do something like this.

The question then is where are you going to hide the spare wheel?

I have a dual 12" sub setup in my boot. If you choose the right sub the boxes can be small enough that the setup fits comfortably between the strut towers leaving plenty of room in the boot for other things.

I had my sub box, a welder, a mid sized PC tower, heaps of metal, some PC speakers, keyboards and other stuff in my boot and still plenty of room left....

As bass is no directional I don't see a problem with having a sub on the side. As long as the box is made right then the setup should be good.

Dude I dunno about that... I have two 12's in my boot and theres NO ROOM left!.... Maybe an R33 has a much smaller boot then the cefiro? not sure

but anyway I was gonna buy one of those tyre puncture inflaters that mercedes uses for the SLK as the SLK doesn't have a spare either.

Originally posted by A31_Cefiro

IAs bass is no directional.....

I tend to disagree...

I can clearly hear the bass difference when the subs are upright and the front of the sub facing the front of the car, in comparison to having the subs right at the back of the boot, laying down.. Much better like that....

.. i think there's an ideal layout -- As far back as possible, flat down ?

By directional he means when you listen to bass notes, you can't exactly define where the sound is coming from (front, back, left or right). As opposed to higher frequencies (treble) you can clearly tell from what speaker the sound comes from.

A sub will generally sound loudest at the back of your boot (closer to the back seat) facing the back of the car. Called rear loading.

Guest Crazyfcuk

to shed a bit of light on the topic, ive taken the tyre out of my boot completly and now rely on a couple of cans of tyre weld and good tyres.

Um goto www.cardomain.com/id/crazyfcuk to see some of the pics of my install if you want cause i cant really be bothered explaining the whole thing again.

However if you've got any questions then just post them here and ill try to reply to them

Ive done more work to the car than whats on the site, but havent updated the stereo section yet will do in the next day or so. also theres some photos on at www.shoreracing.co.nz/nationalsphotos.htm its the one with the green rings around the subs and speakers. actually i think theres only a small photo, so ill post some more tonight onthe cardomain site

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hmmm, what do you mean by getting weaker? And where did you get that test done? I've been wondering about my battery because the cold starts crank super slowly. The voltage is fine. Not sure if cranking amps can be checked at home. Battery is 4+ years old.
    • No. The simplest wastegate hookup, with no solenoid or other form of "boost control" (ie, control over your boost control, if you know what I mean) is a single hose, direct from the turbo outlet/hot pipe, straight and only to the wastegate actuator. It is that pressure signal that drives the wastegate to open, providing the boost control (and by "boost control" here, I mean, limiting how high it can go, which is essentially the spring pressure of the actuator). You only end up with tee pieces and alternate flow paths once you start adding things to the boost control system to allow you to determine how much of that boost signal makes it to the actuator. There are so many ways to do that that there is no single way to run the hoses and tees and the like. If you have a stock boost solenoid, then all it does is either allow all the boost signal to go to the actuator, or open up to allow some of it to bleed off. There needs to be a restriction in that bleeder to allow only a small amount to bleed off. And in a stock system, that would then be plumbed back to the turbo inlet (for "emissions control" reasons). That is actually what that nipple on your BOV return pipe could/would be for. If you have an aftermarket boost controller and solenoid, then the above is mostly true, but there is no need for a restrictor in the bleed, because the solenoid is pulse width modulated to create a variable bleed off. The air that escapes from the bleed can either be vented, or also returned to the turbo inlet. For emissions reasons it should be returned to inlet, but the amount of air being vented is so small that it really doesn't matter (either from an emissions perspective, or from an air-fuel ratio affecting perspective).
    • And other times you just need to go buy bigger injectors?
    • Yup. I actually just blew my turbo. LOL.  should have checked this thread before today. i also have no boost solenoid. so it should be...one line from wastegate to turbo inlet, and a T somewhere in that line that connects to the wastegate return pipe?
    • It's recommended, however I can assure you a good amount of people don't bother. FWIW, the OEM battery lasted 4.5 years and I changed it prematurely too, I reckon could have stretched it to 5 years.
×
×
  • Create New...