Jump to content
SAU Community

Recommended Posts

apexi power fc

blitz frount mount cooler

nismo fuel pump

z32 AFM

AVC-R

dump pipe

NEW garrett highflow turbo (PM me if interested in this - avail. soon)

252 rwkw at 1 bar

Hits boost nice and early and does not drop off.

post-24130-1165276651.jpg

post-24130-1165276720.jpg

97' R33 GTST

-Turbo back exhaust

-Pod

-PFC

-Stage 3 Hi flow

-duel stage boot controller (turbosmart)

-Cooler (600x300x76)

-pump fuel

-14 psi

Made 211kw at the wheels.

Restricted by a 6,000rpm rev limit and injectors and fuel pump maxed out.

Edited by DNR33

R33 GTS-T S1

MICROTECH ECU LT12

850CC INJECTORS

PLAZMAMAN PLENUM

80MM THROTTLE BODY

ARIAS PISTONS

SHOTPENED RODS

FULLY BALANCED

HKS CAMS 256 264

HKS TO4Z

ON 25PSI MAKES 362RWKW TRIED TO PUT POST IN THE RB25 RESULTS PAGE

not sure why it didn't work for you, but i moved your topic in here for you. - Beer Baron

Edited by Beer Baron

R33 97 Series 2

Engine management - Stock ECU

Boost - 12psi

Turbo - STOCK

Coilpacks - STOCK (but taped up)

Custom Front Mount

Custom Intake Pipe

3" Exhuast from turbo back/Split dump pipe

Blitz Pod Filter

Greaddy BOV

220rwkws

:P

1997 R33 GTST series 2

HKS 2530 turbo

HKS boost controller

Apexi power FC

Greddy FMIC

turbo back 3" exhaust with metalcat

pod

95 octane pump fuel

1 bar boost

214 rwKw

Edited by mikel

post-10771-1165577843.jpgCar: R33 GTST

Mods:

Full exhaust, with very hi-flow cat

Bosch 040

Nismo fuel reg

Power FC

FMIC

Nismo 550 injectors

Exedy clutch

Z32 air flow meter

Turbotech boost controller running 17 psi

Slide hi-flow max oversize with VG30 rear housing

Edited by mickr33

RB25

260rwkw on 16psi on 95oct

The tuner tuned it really safe... but say's i could run another 10psi in it but the fuel is crap so i will have to wait.

Specs

Rebuilt motor (8.5:1 Comp ratio)

metal headgasket

Cams

Injector

z32

manifold

38mm wastegate

gt3076r

3inch exhaust

Edited by al_r33

hi, i drive an rb25 silvia.

mods

s2 rb25 det

garett gt3076 (ie.gt3037) .86

tial 38mm gate

delta fin cooler

turbo back exhaust

plenum

14psi on stock computer, afm, injectors and reg with 12.2 afr's

277.9 RW-KW....... my car is a freak.

Edited by drag-on silvia

S2 RB25DET

184RWKW (@5900ish RPM)

Stock Turbo/ECU

FMIC

Turbo Back Exhaust

HKS Pod Filter

9PSI showing on guage

Hit R&R pretty bad at about 5000rpm

19102006296.jpg

Edited by VLT025

got my 94 series 1 r33 gts-t back today after 9 months in the shop getting engine rebuilt e.t.c. gt3040r 600hp turbo with a/r.82 exhaust housing. results : 274 rwkws at 17psi on shell v power racing 100 ron fuel. 346 rwkws at 25psi on shell v power racing 100 ron at 7000rpm @

link to dyno sheet: http://i52.photobucket.com.au

Edited by bigcarl

97' r33 gtst S11

- turbo back exhaust

- pod

- front mount cooler

- pfc

- 550cc injectors

- stage 3 hiflow

- z32 air flow meter

- adjustable exhaust cam gear

- walbro fuel pump (500hp)

- dual stage boost controler

- 16 psi

- 98 octane pump fuel

- 36 degree day

made 245.8rwkw. boost spiked at 18 pounds around 4500rpm then droped off to around 14 by the time it hit 7000rpm. desperatly needs an ebc.

post-24882-1166670563.jpg

Edited by DNR33

My latest run: 288.9rwkw with about 18.5psi at peak power

post-2863-1166819414.jpg

related mods are;

Ms k&n pod with custom fiberglass partition and 100mm uPVC CAI

z32 afm

china hybrid copy cooler

s6 rx7 550 injectors

power fc

HKS 256/264 drop in cams

adjustable exhaust cam gear set to 0

split fire coils and bcpr7es plugs gapped to about .9mm

HKS low mount cast manifold

HKS 38mm ex wastegate with 2 inch pipe plumbed in before the cat

HKS t300s turbo, .7 ar comp cover, T04s comp wheel (unknown trim) T3 rear end in .63 housing

3 inch pipe off turbo

5 inch catco metal cat

3.5 inch custom mild steel cat back with custom 3.5 inch mid muffler and 3.5 inch x force cannon

previous best of 274rwkw at 18.5 psi peak, changed the old hot dog mid for a proper muffler, gained 14rwkw and made 274 on 1 bar this time :)

edit: woops, this is a stock bottom end rb25 in an r32 btw :)

Edited by BHDave

Nissan Skyline R33 GTS-t 96

Blitz kkr430 turbo

Trust 600 x 300

3inch turbo back exhause

Apexi S-afc II

Turbo smart dual boost controller

600hp fuel pump,

fuel regulator

spark plugs

Forged oversized pistons and rings

Block and crank machined

16 psi = 266rwkw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...