Jump to content
SAU Community

Recommended Posts

ATR43SS4BB Alpha Prototype B turbocharger

93 model R33 GTST Forgied CP pistons, valve springs
Stock Cams
1200cc injectors
600x300x75mm Front mounted cool
Brae high mount exhaust manifold
HPVA 50mm external gate plumbed back.
Xforce 3inch Cat back exhaust
100 Cell Cat
Profect B electric boost controller
4inch intake pipe
Adaptronic Plugin

Power 435rwkws @ 25psi , E85 Fuel

power.jpg

boost.jpg

  • 3 weeks later...

R33 gtst S2 Stock rb25det,

Gcg high flow turbo with turbo back exhaust,

after market low mount manifold,

Pod filter

Greedy style forward facing plenium

With 80mm throttle body

nismo 740cc injectors,

front mount

all controlled by a haltech platinum ecu with boost solenoid.

Running 20psi tuned by Ed at Autotech.

242.5kw at the wheels

post-22213-13879029047047_thumb.jpg

  • 2 weeks later...

Rb25det Neo OP6 high flowed factory turbocharger

fronts.jpg

93 model R33 GTST Forgied CP pistons, valve springs
Stock Cams
1200cc injectors
600x300x75mm Front mounted cool
Stock exhaust manifold

HPVA 50mm external gate Teed from factory exhaust manifold

HPVA 18psi Internal gate actuator

Xforce 3inch Cat back exhaust
100 Cell Cat
Profect B electric boost controller
4inch intake pipe
Adaptronic Plugin
E85 Fuel

Max Power externally gated from stock exhaust manifold: 376rwkws @ 24psi

Max Power internally gated using stock exhaust manifold: 345rwkws @ 22psi

op6powerall.jpg

op6boostall.jpg

  • Like 1

96 R33 s2

150xxx k standard motor unopened

Garret 3082r . 82 rear

NZ hybrid performance manifold

Tial Mv-R 44mm wastegate

Plazmaman plenum + throttle body

1200cc injectors in stock rail with stock reg

Walbro 460 e85 pump

4" exhaust turbo back

PowerFC

Turbosmart bleed valve boost controller

344.8rwkw/462hp @23 psi on e85

Tuned by the one and only Guilt Toy aka Anthony Espinola. (Wont let me upload pic atm will try later)

1989 Silvia S13
Unknown KMS Rb25 had rings replaced few years ago thats it
KINUGAWA T25G Anti-Surge 4" - Comp. Whee: 60.2/78mm - Turbine Wheel: 54 / 61 mm

China high mount manifold

China front mount cooler
China unknown size wastegate LOL
China greddy copy plenum with non turbo Rb25 Throttle body
550cc Sards
Bosch 040 intank
3" Dump into twin 2.25" Side pipes under passanger door
PowerFC

98 BP fuel
Turbosmart bleed valve boost controller
351.5Rwhp / 260RWKW

  • 5 weeks later...

456RWRP/340RWKW 22PSI - Need better valve springs for more boost.

Standard RB25 NEO

Steam pipe high mount manifold

Garrett GTX3582R V-band housing

Turbosmart ProGate 50mm

Bosch 1000cc injectors

Proflow fuel rail

Tomei fuel pressure regulator

Plazmaman plenum

Haltech Platinum Pro ER34 Plug-in

Haltech 4 bar map sensor

Haltech boost control solenoid

Haltech flex fuel sensor

Splitfire coil packs

HKS HighPower exhaust

China 600x300x65mm FMIC

Walbro 460lph E85 fuel pump

Direct Clutch Services 10 puck button clutch

1535622_10202836245128500_640930943_n.jp

Edited by TheGeniusMoose

Stock RB25DET (head bolts, head gasket, internals)

hks 256/264 cams and ex cam gear

nismo 740cc injectors

apexi pfc with a z32

garrett gt3076 .82 turbo with tial 44mm gate

GTR intercooler

Greddy plenum

Tomei 500hp lift pump with a 044 feed

Nismo fuel reg

23psi and BP Ultimate

BIG thanks to Trent and Cat from Chequered Tuning. Glad to see there are still legit people in the Auto industry.

Stock RB25DET (head bolts, head gasket, internals)

hks 256/264 cams and ex cam gear

nismo 740cc injectors

apexi pfc with a z32

garrett gt3076 .82 turbo with tial 44mm gate

GTR intercooler

Greddy plenum

Tomei 500hp lift pump with a 044 feed

Nismo fuel reg

23psi and BP Ultimate

BIG thanks to Trent and Cat from Chequered Tuning. Glad to see there are still legit people in the Auto industry.

post-22302-0-23997000-1392286371_thumb.jpg

sl2ss2comps.jpg

R33 Rb25det Stock engine
Brae exhaust manifold
HPVA 50mm external gate
HyperGear SLSS2 Turbocharger
600x300x75mm Intercooler kit
3inches turbo back exhaust
1000CC injectors
Power FC
E85 Fuel

car.jpg

Final result of 356rwkws @ 20psi

slss2power.jpg

slss2boost.jpg

  • Like 1
  • 2 weeks later...

96 R33 s2

150xxx k standard motor unopened

Garret 3082r . 82 rear

NZ hybrid performance manifold

Tial Mv-R 44mm wastegate

Plazmaman plenum + throttle body

1200cc injectors in stock rail with stock reg

Walbro 460 e85 pump

4" exhaust turbo back

PowerFC

Turbosmart bleed valve boost controller

344.8rwkw/462hp @23 psi on e85

Tuned by the one and only Guilt Toy aka Anthony Espinola. (Wont let me upload pic atm will try later)

R32 Sedan,

RB25NEO (unopened)

Full Race Manifold,

Twin MVR44 Gates

GTX4294R

Plazmaman Plenum

Plasmaman 100mm GTR intercooler

Custom 3" intercooler piping

Custom 4" exhaust

260 degree pon cams

Adjustable intake and exhaust gears (retained VCT)

Arp studs (changed one at a time with head still in place)

Factory valve springs, coilpacks headgasket etc.

Vipec Plug and play for R34

United E85

Allstar garage tune.

681hp @. ~25psipost-66887-13932700548444_thumb.jpgpost-66887-13932701579383_thumb.jpg

  • Like 1
  • 2 weeks later...

R34 GTT RB25NEODet

usual suspects

FMIC

Blitz Boost controller

Cheapie Pod

stock turbo

stock injectors,intake

Big exhaust from turbo back , dont know size? should ask old owner

98octane BP fuel

Running 12psi the car made 201kw atw

cant find dyno sheet ? its somewhere

that was 2 years ago since that tune the blitz controller died and im now using a boost tee

got a few mods in mind, i was told to get a kando td06 20g as a bolt in kit but im looking around here thinking its too small

and a t67 would be a better choice, i wanna make max power! :yes:

few questions i got

so a t67 25g? 1000cc injectors, bosch 044 fuel pump , z32 afm and a nistune ecu and good tune should be about all i need for now yeah?

ive not found a kit for the 34gtt for the t67 soo, is it going to fit low mount or have to be changed to highmount?

be alot cheaper if i could get the t67 to fit low mount factory position yeah ?

if changed i gotta change the intercooler piping, exhaust manifold and intake ?

looking arond here and at 34geeteetee build thread is helping me out and what a machine!

will accumulate parts and then drop it in to the mech to get done then tuned

cheers and appoligies for the newb questions i just need to be told whats what ,

:woot:

  • 1 month later...

-Apexi Power FC

-1.2bar boost via blitz sbc
-PULP 98
-850cc injectors (remanufactured)

-GTR Fuel pump

-High flowed stock turbo (Steel t3 turbine, largest front wheel could fit)

-3" exhaust from down pipe back (3" coby resonator >3"RPS muffler)

229rwkw @ 16psi

sorry about the graph, but you get the idea.

post-95424-0-78786600-1398582393_thumb.jpg

Edited by Badgaz
  • 3 weeks later...

Rb25det

Factroy manifold with 38mm waistgate flange welded to it

proboost 38mm waistgate

GTX3071 .82 rear

greddy intake

nismo 555 injectors

camtech 268-9mm cams

link g4 plugin

20psi boost controled by link

grate result and pulls from low down to redline

315rwkw (420hp)

post-91182-0-51899900-1400330474_thumb.jpg

R33 rb25det

Unopened engine

550cc injectors.

21u high flow by hypergear

Greddy profec b type 2

Blitz return flow

Walbro gss342

Split fires

Power fc

98 octane

245kw @ 18psi potential exhaust restriction

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...