Jump to content
SAU Community

Recommended Posts

sometimes i think we should have more rights as motorists when it comes to being pulled over for a "random checkup"

i bet about 5 rusty old fords with drum brakes all round went past and he didnt even batter an eyelid.

dude u are right there, althought (touch wood) i havent been pulled over from what i hear it would be nice to have more rights...

i saw this VL driving around had no back window total rust bucket was supprised it was even driving exhaust about to fall off and he went straight past a cop and as you said mate "didnt even batter an eyelid."

The only advantage of not having my line on the road for the last year is becoming apparent.

Dont know how he did not get you for that anti revenue raising front plate tucked under the front driverside bumper.

Why not put it in front of the FMIC on a loose door hinge at the top so the faster you go it just tucks back under without obstructing air flow :P

Why not put it in front of the FMIC on a loose door hinge at the top so the faster you go it just tucks back under without obstructing air flow :D

I busted the bolts that hold the centre bracket in the threads... and haven't got any easy-outs yet so can't bolt anything back there :Oops:

I got pulled over at about 11:45 on Wednesday night, for a random breath and license/reg check. I was a tad concerned that I was going to get a canary for the 13" steering wheel and harness I had in my car. And the fact that I didn’t clear the EPA notice, for the BOV. He didn’t even ask to look under the bonnet. Nice bloke, polite, and even laugh at a funny I cracked!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...