Jump to content
SAU Community

Recommended Posts

  • Replies 125
  • Created
  • Last Reply

Top Posters In This Topic

Very different setup now Ken.

I wont start on Autonics faults but they sure have their share.

Did i mention Wolf has WA fastest 2 SR20s? and RB26.

Did I mention that the highest street hp ( Leewah) GTR in Oz runs Autronics and the highest Hp at Summernats did too...

If the wolf has a very different setup now then why isn't it mentioned on the website or info made avaliable to tuners. Once again I ask why the info is kept so *inhouse* when by sharing it around, it will benefit the product and the yourself as the WA agent.

Cheers

Ken

gtrken isnt the first time i have heard that the wolf rot idle is "fake"....

i have only HEARD i dont know so dont take this as fact.

so ken, what your saying is wolf only lowers and ups the revs to simulate rotational idle...it doesnt actually drop a cylinder??

people argue that it still cools the engine...but its hardly the point...

sounds good, but what about the people that actually need to cool their engine faster....

When you are sick of Rotational idle its nice to have real Idle control with valve openings for cranking and post start idle up and anti stall on decel. fast idle cold etc and only the PFC an Wolf do this, autronic is a very basic voltage based system so most shops only set idle with a srew driver.

Guess what we do cut injectors on rotational idle.

If Kym hates his Wolf we can plug the Nissan ECU in and send him to get something else.

Most shops have in house only secrets.

question for both ken and steve;

with both pfc and wolf can u buy addons for example antilag and have it hook up with the ecu and have both run right?

(by addons i mean, something not made by wolf or apexi, just a standalone type controller for antilag etc?)

cheers mike

No huge plans really - about 350rwhp is all :) Wolf is decided as Steve said :)

Pro's i've seen for Wolf that benefit me:

* No need to buy bigger injectors due to wolf's injection method

* No need for new MAFs cos wolf can use MAP

* Rotational Idle (wank factor)

* Antilag capability

* Laptop Tuneable

* Renowned good results

* Use Wolf Boost Control - Sell EBC

PowerFC Benefits for me:

* Wider range of Tuners

* Renowned good results also

* Cheaper price

* Easier Plug'n'Pray operation

Both have great features really, and it was a hard decision. I don't care for "This ECU is being used in the fastest SR/CA/RB in australia" Because mine is strictly road use :D

As Gav said - He chose the wolf due to the good results previously seen with it, and no doubt I will see good results too :)

Now comes the hard part - What turbo choice for good response with about 350rwhp?

I know a few people have awesome results with a T04 Hyrbid something-or-rather....

Thanks for the good/bad points guys, thankfully not too much bitching eh? :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...