Jump to content
SAU Community

Recommended Posts

OK thats 10 short shift kits so far. :rolleyes:

Monday (6-12-2004) I will call the last day for this batch becase I know some of you are keen to get the kit installed... I will email everyone on monday.

There is still room for more people. If you want one better get in while its cheap...

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

My mate wants one aswell - so now I'll grab 2 for R33. What is the postage costs for 2?I reckon we'll hit the $110 mark at this rate. 15 now 5 more to go.... :(

At this rate I reckon we will hit the $120 dollar mark... awesome.. Unfortunately I  will have a lot of posting to do :(

I have just notified everyone who was interested. If you have not received an email or PM then PM me so I can send you the details.

Also I have extended the deadline till the end of the week possible early depending on when people get back to me. So if somebody out there still wants a short shift kit let me know. They will be $120 each plus 13 for p&h.

Those that got Rafael's e-mail will now know there is some doubt whether these kits will fit an R32 GTR. I've indicated that I'm not prepared to continue with my purchase unless it can be confirmed that it will fit without problems - is there someone in Brisbane with an R32 GTR and who is planning to buy that can get the situation confirmed one way or another ??.

With the number planning to purchase I don't see why one or two dropping out should make any difference to the final price.

Good Luck.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...