Jump to content
SAU Community

Recommended Posts

Just road tuned an rb20det with a kinugawa td06-20g 8cm iwg today.

Typical struggle with boost control, but severe porting and flowing of the wastegate seemed to get that under control.

Hits the rollers in a month, should be interesting, i can do a comparison with hellaflush7's result!

10537363_10203468636890315_4752197572718

Stock unopened RB20DET out of an R32.

Kando TD06-20G 8CM

NZ Performance Himount manifold

Turbosmart 45mm Gate

Bosch ID1000 inj

United 107 Raceblend

Profec B Spec II

302kw @ 25PSI

Could have kept going but Cyl 5 is looking a little tired on the comp test... have backed boost off to 18PSI and she is making 273kw now

Awesome result! When is 18psi reached? Is it just a TD06-20G or a TD06SL2 20G?

Just road tuned an rb20det with a kinugawa td06-20g 8cm iwg today.

Typical struggle with boost control, but severe porting and flowing of the wastegate seemed to get that under control.

Hits the rollers in a month, should be interesting, i can do a comparison with hellaflush7's result!

Same question for you :) Is it an SL2 20G or actually a straight TD06-20G? Looking forward to results!

LOL, another example where the TD06 seems to do a perfectly good job. I dont understand all the fuss over the L2. Hell its smaller than a TD06 and is no more responsive and just ends up with less torque to spin the 20G compressor. TD06 all the way :) Gutless SR20 owners can stick with their L2s :)

Yeah Roy, there definitely seems to be a pattern here. I know FP never used the L2 - they only use the TD06 or TD06H and between that and some of your results I've definitely been taking a bit of notice, the jury isn't out with me yet but I definitely am pondering on it

  • 4 months later...

Not quite 260rwkw but close enough.

Rb20det

Fmic

Hks pod filter

Hks 25/30 turbo

Turbosmart boost t

3" exhaust

Bosch 1000's

E85

Made 257rwkw at 19psi

post-91056-0-28054000-1417987971_thumb.jpg

Edited by random1jzmx83
  • Like 1

If only the 2530 could be made to hold onto boost up high then the result could be even better. Still 2 bux 60 from a 2530 is awesome. Imagine it would drive well too!

Yeah can't complain really. Makes some good power for an old school 25/30

  • 3 weeks later...

Probably in another thread, but I couldn't find anything. So feel free to redirect me there.

Which ID1000's are people using on their RB20? (Part number, original intended applicate etc)

I've currently got RX7 555cc Injectors running on an RB26 PFC with resistors inline rather than the GTR resistor pack.

I'm guessing besides the spacers? for the (14mm) injectors and new plugs for the loom I'll need to remove the resistors in the loom since RB26 ID1000's seem the go?

  • 2 weeks later...

Not ID1000's but Bosch EV14s http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb20det/1989-94-rb20det

Had them in for 12 months, drop in fit, no problems at all, few of my mates have commented how nice my cars idle is.

Probably in another thread, but I couldn't find anything. So feel free to redirect me there.

Which ID1000's are people using on their RB20? (Part number, original intended applicate etc)

I've currently got RX7 555cc Injectors running on an RB26 PFC with resistors inline rather than the GTR resistor pack.

I'm guessing besides the spacers? for the (14mm) injectors and new plugs for the loom I'll need to remove the resistors in the loom since RB26 ID1000's seem the go?

I run the GTR resistor pack am running ID1000 GTR injectors. They came as a kit with plugs etc. Seem to think they were 1000.13.04.60.14.6

Just soldered the new plugs onto the loom and kept everything else as per the old Nismo RB26 injectors, R32 AP Eng Power FC and GTR ballast pack

  • 2 months later...

This is a originally internally gated PU high flowed Rb25det turbo that ended up bolt to a RB20det for a bit fun. It made a not so responsive 283rwkws @ 20psi on E85 fuel. Owner still had fun, here's a short video been sent in:

  • 5 months later...

I run the GTR resistor pack am running ID1000 GTR injectors. They came as a kit with plugs etc. Seem to think they were 1000.13.04.60.14.6

Just soldered the new plugs onto the loom and kept everything else as per the old Nismo RB26 injectors, R32 AP Eng Power FC and GTR ballast pack

Ended up with these bad boys.

http://www.raceworks.com.au/fuel/injectors/bosch-1150cc-4-bar-3-4-length-injector/

Just need to fit the plugs to suit since I had denso injectors.

Anyone know the latency settings for Power FC? (RB26 PFC D-Jetro if that helps)

I have the same turbo. And i was actually very curious about the power this turbo was capable of. The car is going to be ready to tune this weekend. I'm getting it Dyno tuned on adaptronic with a boost solenoid and no more maf sensor. :D I'll let you guys know how it goes.

R32 gtst

Rb20det

Godspeed forward facing plenum

550cc injectors

Tomei outlet pipe

Kakimoto turbo back

Stock internals

Kinugawa td06 20g 8cm iwg

Stock manifold

Adaptronic ECU

Walbro 255 fp

Fmic

Edited by HanBear
  • 1 year later...

So after having a long read I have good hopes for my build.

Plans are:

FFP

1000cc injectors

E85

Pro spec 2 ebc

Tomei fpr

Walbro 460

6 boost mid mount

Kinagawa TD06H -20G 8cm rear housing

40mm turbosmart wastegate.

Stainless exhaust straight pipe

Stainless IC piping.

Nistune ecu

Will be interesting to see if I can crack the 300kw mark, especially considering I want to run 22psi high boost and 17psi low boost.

I know the longer runners on the standard manifold work great for a street car with torque lower down being better, But I was hoping for slightly better response from shorter ic piping and lower temps as it is a track only car.

and it makes everything so much easier to work on.

I assume the TD06H is a no go due to response?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...