Jump to content
SAU Community

Recommended Posts

Hi Guys,

Looking to do some work on the ole R32 GT-R 'zilla over the Christmas --> New Years break. Below is what I plan to do in terms of fluid flushes/changes, along with the fluid/oil.

I was wondering if people can give me an idea of just how much of each oil/fluid I will need for each of the jobs...? Also, recommendations are welcome :cheers::

Gearbox oil - Redline Lightweight Shockproof (~4 litres)

Transfer case oil - Dexron III compliant ATF (~2 litres)

Front Diff oil - ??? (~1 litre)

Back Diff oil - ??? (~1.5 litres)

Brake fluid - Motul DOT 5.1 Brake Fluid (??? litres)

Coolant - ???

Already done:

Power Steering Fluid - Castrol Transmax Z (~1 litre)

Engine Oil - Royal Purple (~7 litres)

Cheers,

Lucien.

Link to comment
https://www.sau.com.au/forums/topic/58968-r32-gt-r-fluid-oil-flush/
Share on other sites

Do you have a copy if the WS manual ??, all the amounts are given there. 7L for the engine oil ?? supposed to be about 4.5-5 depending on whether the filter is changed or not.

I've been trying to find out about what PS fluid to use - who recommended the Transmax (sounds like auto tranny fluid ??). The stuff recommended in the WS manual has never been available in Australia, apparently.

I use and recommend Penrite products :cheers:

Hi Guys,

Looking to do some work on the ole R32 GT-R 'zilla over the Christmas --> New Years break.  Below is what I plan to do in terms of fluid flushes/changes, along with the fluid/oil.  

I was wondering if people can give me an idea of just how much of each oil/fluid I will need for each of the jobs...?  Also, recommendations are welcome :):

Gearbox oil - Redline Lightweight Shockproof.

Transfer case oil - Redline Lightweight Shockproof.

Front Diff oil - Redline Lightweight Shockproof.

Back Diff oil - Redline Lightweight Shockproof.

Brake fluid - Motul DOT 5.1 Brake Fluid.

Coolant - ???

Already done:

Power Steering Fluid - Castrol Transmax Z (~1l)

Engine Oil - Royal Purple (~7l)

Cheers,

Lucien.

Hi SteveL,

I do have a copy of the WS manual, but I find its rather unhelpful, hence I was after people who have changed these oils to get a real idea of what I actually need.

It was a complete engine oil flush and filter change, not just a straight oil bleed + change, hence the rather high usage of oil (it may have been closer to six: I don't have the workshop receipt in front of me :cheers: ).

Transmax Z is a fully synthetic ATF but also explicitly states its designed for power-steering applications. I did a search on here and someone recommended it, so gave it a try. I found it extremely hard to bleed the power steering fluid (as I couldn't jack the car to get to a lead under the reservior), so I had to syphon it out of the top.

LW.

Aren't you suppose to use ATF in the transfer case not g/box oil?

:werd: not gear oil in the transfer case

and make sure before you open any drain plugs that you can open the filler plug first :cheers:

Re street use GTR V Spec II & N1 spec

Engine Oil - factory spec 7.5W-30/ 5W-30 5 - 5.3 litres

Manual Trans 75W-90 GL4. 4.1 litres

CastrolVMX is fine or Nissan mission oil BNR34 Special-although REDLINE do

a good oil, expensive.

Transfer prefer Nissanmatic D or can use dexron III 1.8 litres

Attessa Actuator- Gen Nissan Power Steer fluid 2 litres enough to

flush & bleed actuator system.( DON'T USE DEXRON OILS REFER NOTES BELOW)

Power steering (HICAS R32) Gen Nissan Power Steer fluid 2 litres enough

to flush & bleed actuator system.

Front diff .Hypoid gear oil GL-5 80W90 1.3 litres( for modified vehicles be sure it hasn't got front LSD Diff- if yes then use LSD GL5- 80W90)

Rear Diff.Hypoid gear oil LSD GL-5 80W90 1.6litres ( GTR spec 1.3 Litres)

1. Transfer case fluid

Nissan Matic D is strongly requested because high torque is applied to

transfer unit.

2.. Transfer case (ATTESA E-TS-PRO Actuator) : It is not acceptable to use

DEXRON III fluid.

> Only Nissan Power Steering Fluid Special use is required.

Today I received the technical information from our design department.

1. The difference between the DEXRON III and Nissan Power Steering Fluid

Special

The viscosity characteristic of Power Steering Fluid Special is lower than

that of ATF DEXRON III and the resistance to wear is also improved.

Each viscosity is the same level at 100 deg.C and the former viscosity is

designed to have the lower value for under 100 deg.C than the latter

viscosity.

This characteristic is aimed to rotate an oil pump located in ATTESA PRO

actuator easily at the extremely low temperature (Around -30 deg.C or -40

deg.C)

2. What will happen if a customer puts DEXRON II or DEXRON III into the

ATTESA PRO actuator reservoir in the trunk ?

The 4WD performance will be largely decreased at the low temperature

because the viscosity value of DEXRON II or III is extremely high compared

to that of Power Steering Fluid Special ;

As the rising characteristic of 4WD torque transfer becomes worse, it takes

the longer time to transfer the driving torque to the front wheels. There

is a possibility that the 4WD cannot be achieved in the worst case.

This may or may not be useful - straight out of the Australian delivered GTR32 owner's manual:

Recommended lubricants:

Fuel: Premium unleaded - min octane 95 RON

Engine: API SG 7.5-30 Turbo

Manual transmission: API GL-4 80W-90

Transfer case: Nissan Matic "D"

Power Steering Rack: Dexron II

Cooling System: Nissan LLC (long life coolant)

Brake and Clutch: DOT 4

Capacities:

Fuel: 72L

Coolant: 8.7L

Engine w filter: 4.6L

Engine w/out filter: 4.2L

Power Steering: 1L

:(

 

 

1. Transfer case fluid

 Nissan Matic D is strongly requested because high torque is applied to

transfer unit.

 

2.. Transfer case (ATTESA E-TS-PRO Actuator) : It is not acceptable to use

DEXRON III fluid.

>   Only Nissan Power Steering Fluid Special use is required.

 

Today I received the technical information from our design department.

 

1. The difference between the DEXRON III and Nissan Power Steering Fluid

Special

 

The viscosity characteristic of  Power Steering Fluid Special is lower than

that of ATF DEXRON III and the resistance to wear is also improved.

Each viscosity is the same level at 100 deg.C and the former viscosity is

designed to have the lower value for under 100 deg.C than the latter

viscosity.

This characteristic is aimed to rotate an oil pump located in ATTESA PRO

actuator easily at the extremely low temperature (Around -30 deg.C or -40

deg.C)

 

2. What will happen if a customer puts DEXRON II or DEXRON III into the

ATTESA PRO actuator reservoir in the trunk ?

 

The 4WD performance will be largely decreased at the low temperature

because the viscosity value of DEXRON II or III is extremely high compared

to that of  Power Steering Fluid Special ;

As the rising characteristic of 4WD torque transfer becomes worse, it takes

the longer time to transfer the driving torque to the front wheels. There

is a possibility that the 4WD cannot be achieved in the worst case.

Please read

GTR V

GTR V: I fail to see how posting the same thing twice is of any great help.

I don't want to use Nissan OEM fluids. I know Matic D is an ATF fluid, which would suggest that ATF should be used in the transfer case and not straight gear oil. Is that the point your trying to make?

LW.

I think the the point he is trying to make is even though dont want to, its recommended to

use Nissanmatic D.

I'm sure people have used non nissan spec ATF before.

Then again theres probably a couple running around with shockproof in the transfer case

aswell!

I'm gonna do my soon, let us know if you find a better alternative.

yeah we run non nissan spec ATF.

No offence to redline but are they aware of how the gtr transfer case works or are they just guessing? It apparently very similar to an auto trans and does run the same fluid.

Hopefully someone has some exact numbers, but ATF is considerably thicker than regular gear oil, and is often used by the shonkey dealer to hide gearbox problems.

yeah we run non nissan spec ATF.

No offence to redline but are they aware of how the gtr transfer case works or are they just guessing? It apparently very similar to an auto trans and does run the same fluid.

Hopefully someone has some exact numbers, but ATF is considerably thicker than regular gear oil, and is often used by the shonkey dealer to hide gearbox problems.

You must use atf ( dextron 3 ) in the transfer case , it holds just under 2 lts from memory fill to the filler hole ( until it runs out ).

Duncan the atf oil is thinner that gear oil .

Use gear oil; in the g/box 75-90 .

You can use lsd diff oil in both diffs , you cant use non lsd oil in lsd diffs .

Ok, so basically we have established Redline has no idea: glad I asked because a couple of people seem to have followed Redline's suggestions.....

So scratch Lightweight Shockproof for the transfer case (which is good, since it costs the earth). Does anyone have specific recommendations for a transfer case oil? Likewise for the diff oils? As I understand it the R32 GT-R runs an open front and mechanical rear diff: will the same oil be OK?

Cheers,

Lucien.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...