Jump to content
SAU Community

Recommended Posts

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

^^^ That game screen on the pre-release was changed alot for the actual game... you can only see the GTS-R in the 'Old Timers' used car section.... even then it only appears peiodically. You can also race against the GTS-R in the 'Race of Red Emblem' Skyline series.

Guys I also want to confirn the DR30!!!

...and...

JAY LENO'S 'TANK CAR'!!!

Some more pics:

Option Stream Z 2!!!!!!!!!!!!! and i'll try to go to 360Km/h just like Dai!!!

I soooooooooooo want this game!

Will Jap-spec GT4 works on Oz-spec PS2?

Cheers

Grant

The Option Stream Z (2004 model - not the 1st one) is a laggy bitch! It only comes on song at about 6,000rpm... before that... doughy offboost goodness. It sucks on the circuit.

Hahaha check it out, I got the Daimler Benz 'Horseless Carriage'...

1hp... max rev limit 900rpm... and does the quarter in...

1.32:2...

With a top speed of 18-odd km/h, it was painful waiting for it to roll over the line I can tell you.

hey rezz,

is there very much japanese in the game? i have my ps2 chipped to play jap games and can buy it online and have it here in aus in a week. So tempting. I will be buying the pal release but if there is enough english to play it for a few months i could be swayed easily. thanks mate.

ps. how long does learing japanese take? are there any shortcuts :wassup:

Rezz; with your gunmetal BNR32 and red V35 coupe, did you add the rear wings to them? They sure as hell don't look stock :aroused:

Also, can you confirm whether there are brand name aero kits available? i.e. from C-West/T&E Vertex etc.

Mate's going to have fun with the Z18 Bluey...He's a pretty big Bluebird fanatic and is working on buying a 910 Series 3 TRX atm

prae: Yes, I changed the rear spoilers on those cars. About the aero kits, no, there aren't any unfortunately... I was expecting them to at least have some front spoliers or splitters... but no deal.

Phat6: No, they don't show off intercooler or exhaust mods :D You can't change engines either :):(... Drift mode? Nope... there is the HKS Genki Hyper S15, Blitz D1 R34 'Nomura' drift Skyline, and BP D1 FC3S RX-7 drift car, but they don't drift very well unless you put sports tires on the back.

Oh yeah I almost forgot: there's a feature in the wheel shop called 'Wheel Of The Day', where you can put *any* wheel from *any* car (bar the Daimler Motor Carrriage) on to the car you are modifying. The wheels change daily (of course) with about 15 wheels on show each day. It's a pretty cool feature because alot of wheel that aren't represented in the brand name shops (ie: Bridgestone, Yokohama, OZ etc) are in the Wheel of the Day section... eg: Regamaster wheels are in WOTD, but not in the brand name shops.

There are alot of steelies and hubcaps from oldschool Vw's and Yank cars that you can put on your Cizeta V16T!!!

To be able to drift in GT3, you could just buy the full race suspension, fully tunable lsd, and simulation tires. As far as horsepower, try to hit around the 400 mark on all cars, some a little under (like s13's).

The trick is in the settings. Go into your settings menu for your car and turn off the traction control and yaw control (turn them both down to zero). If you don't do this, you'll have a hell of a time trying to drift.

Suspension setup is a personal preference, I like it to be pretty hard.

Does this work in GT4?

Thanks for answering my questions Rezz, and for posting screenshots up so we can have an ogle :)

Can't wait for it to be released in Aus :D

Oh, sorry for making you repeat yourself. Just re-read the thread and you've already answered, thanks again though :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...