Jump to content
SAU Community

Zoom Auto Imports - Serena Van

NismoGirl

By NismoGirl,
in Queensland

 Share

Recommended Posts

NismoGirl Grand Master

NismoGirl

Posted
Posted

Just read an article on the Zoom Auto Imports van. Interesting stuff. I thought I'd post it up here for you to read too :( Troy has been out on one of our Thursday night cruises, so some of you may remember this car.... (err... van?)

It takes somebody with a strong will to go ahead and modify a vehicle that nobody else would bother.

Troy ******* of Brisbane’s Zoom Auto Imports is one such person.  

When Troy set up his flourishing Japanese performance and import business about 18 months ago, he found himself thinking about a promo vehicle. Something to take to car shows and instil the name 'Zoom Auto Imports' into people’s heads. Well, this conflicted with the pressing need for a family hauler but Troy came up with a solution of the most unlikely variety.

He bought a Japanese-spec Nissan Serena 2.0 diesel van, whacked on a body kit, painted it green, slammed it with pimp-style wheels and – wait for it! – converted to two litre turbo SR20DET power!

The Serena is the ideal recipient for an engine conversion. Take a look at the Serenas that were officially delivered to Australia between 1992 and 1995 and you’ll notice they run a naturally aspirated SR20 under the floor. About now you’ll start to see how the conversion makes sense. However, what makes it difficult is the stock Serena engine is configured like front-wheel-drive SRs, whereas most SR20DETs are rear-wheel-drive based.  

Not one to shy away from a challenge, Troy reached across his workshop floor and grabbed a fresh VVT SR20DET to fit into his van. Installation required relocating the engine cross member, modifying the bodywork to fit the crank angle sensor and extensively modifying the intake manifold to provide the necessary clearance. The intake manifold modification was performed by ARE.

A 600hp Bosch Motorsport fuel pump with an ARE surge tank and half-inch lines provide the fuel flow demanded by the SR turbo.

Interestingly, the transmission is a Nissan RB20 auto which is mated to the original Serena diesel extension housing. A 3500 rpm stall converter keeps the SR running on-song.  

If all this sounds like a lot of work in uncharted territory, it is! Thankfully, one of Troy’s business specialties is engine conversions.  

Standard SR20DET performance wasn’t enough for Troy who also went for a Trust exhaust manifold hung with a TD06 20G Trust turbo and 50mm Trust external wastegate. As you can see, the manifold is thoroughly heat wrapped.

Boost pressure reaches 18 psi and an ARE 800 x 400 x 120mm air-to-air intercooler keeps the charge-air chilled. A big HKS blow-off valve, oil breather catch can and an A’PEXi pod filter are also squeezed into the engine compartment.

The exhaust is nothing less than a 3½-incher by Gonzo – it uses a Kakimoto canon rear muffler and a 1 metre custom centre resonator. Troy says the long centre resy makes a huge difference – his Serena is easily within legal noise limits.

The engine management system in this weird and wonderful creation is a fully programmable MicroTech LTX8 which controls fuel, ignition and boost. A set of 780cc injectors are aimed down the SR’s throat.

The RB auto transmission is controlled by a Japanese ShiftMaster module which, at the touch of a button, makes up-shifts up and down-shifts while the trans selector is left in Drive.  

Out back is a locked 4.4:1 Serena diff; no doubt this helps Troy drop the mean burnouts that we witnessed!

In its current mechanical configuration, Troy’s Serena has run with the big boys on the rollers of ChipTorque’s Dyno Dynamics chassis dyno. How hoes 255hp at the wheels grab you?

It’s a fair way away from the stock Australian-spec Serena with around 130hp at the flywheel!

The Nissan Serena is an orphan model in Australia so you’re forgiven for not noticing Troy’s body mods. A full aftermarket body kit comprising skirts, front and rear bars and a grille was prised from a Senera van in Japan (the donor vehicle was being wrecked – Troy didn’t just stumble across it in a carpark!). A ’98 Serena front-end and a smooth tailgate – with the number plate inset, badges and handle removed – further add to the interest. The tailgate is now opened via remote.  

The eye-catching green paint was carefully sprayed by A1 Custom and is a custom mix based on a 1976 Holden colour. The windows are also tinted as dark as legal and Troy has invested in some signage to advertise his import business. We’ve gotta say, if you’re in the Brisbane area you should drop by and check out the stock.

Wheels are 18 inch Emitz Works wearing Falken 225/45 and 255/40 rubber. These fill the guards nicely thanks to lowered King front springs and reset rear springs. Pedders airbags are fitted to the rear, while Monroe struts are used up front.  

Braking this 7 seater run-away is an effective anchor upgrade from the Nissan parts bin. A pair of S13 discs and calipers can be found at the front, while – for now – the rear uses the standard drum set-up.  

But, let’s face it, this machine is all about attracting attention and going fast in a straight line.

At its first drag strip outing Troy dropped more than a few jaws when his 1760kg van stalled up off the line and ran a 14.0 at 101 mph! Say “bye-bye” Mr WRX!

Inside, the Troy’s Serena has all the carrying ability that is needed. At present, the interior is equipped with an AutoMeter monster tacho, boost and oil temperature gauges on the A-pillar, a Momo steering wheel and green painted trim highlights. At the time of our photo shoot, a PlayStation 2 and a set of LCD screen and headphones were going in.  

Oh, and we should mention Troy’s latest plan; to run under 12 seconds down the quarter with a new engine that’s built with all the good bits to cope with 30 psi of boost!

And there are a few other plans as well. Did we mention it’ll soon be wearing a wide-body kit, twist-up doors and 20 inch wheels?

At this rate it won’t be long until the name Zoom Auto Imports appears in the Guinness Book of Records under the heading “Crazy Stuff”...

It's pwerdy. :aroused:

Link to comment
https://www.sau.com.au/forums/topic/60274-zoom-auto-imports-serena-van/
Share on other sites
OVL-747 Enthusiast

OVL-747

Posted
Posted

well i can gloat a little here , a long long time ago when it was in construction stages a lent a hand to help put the engine in - didnt do much , but was down there many afternoons with troy and brenno playin on it.

but ur right about it being a family hauler - he gets the missus and 5? (i think its 5 now) kids in it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      "Cheap" bolt on turbo on RB25DET NEO

      By Murray_Calavera · Posted

      The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • GTSBoy
      new here

      By GTSBoy · Posted

      I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...