Jump to content
SAU Community

Recommended Posts

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

Link to comment
https://www.sau.com.au/forums/topic/60406-sard-regulators-and-injectors/
Share on other sites

You will struggle to get 250 out of the standard injectors without at least a new rising rate regulator. (and I wouldnt really consider 300)

If you are going to spend the $ requred to build a RELIABLE 300rwkw motor the $1000 (or a bit less) for new injectors will be only a small component.

Check out some of the other threads, but you will need to strenghen the internals (rods and pistons) turbo, intercooler, ECU etc etc. your up for several thousand to do this, then you have a problem of getting traction on a gtst with that much power.

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?  

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

If you want a Fuel Pressure Regulator Sard TYpe R, i have one ..

PM me.!! $190

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

They dont hold there fuel pressure.

Or just get a SX.. double the price of SARD but better then ANY fuel pressure regulator in the world.

F1 car's use SX.

Cheers

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

Ya, a few guys have had problems with the SARD ones on RB25s

Nismo make 740cc only, but if you have a PowerFC there wont be a problem, and they are only an extra $50 or so over Apex/HKS 550cc ones so if someday you wanna go for 300-350 you'll be all set.

You wont need a fuel reg either. Im still using my stock one.

270rwkw - nismo 740cc injectors and no problems.]

cheerss - ash

been doin some more research and am curious if a set of S15 injectors would be more suitable. Apparantly these can fit straight on. How much power are these good for?? Can they handle over 250rwkw??

Also read that I may be better off goin for a gtr fuel pump. How much power are these good for?? can they also handle over 250rwkw?? how much is a good price for a gtr fuel pump??

With these upgrades would it be necassary to upgrade the AFM?? If so, any recommendations??

:)

  • 2 weeks later...

Hmm, I was going to go for the 700cc Sards, great price from Greenline however this is the first time I have read anything bad..

Could someone explain this Single v quad issue to DOHC's heads?

Is this an *issue* or will it run well... or are we talking go for HKS etc...

Hmm confused now. R32 GTR

:rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...