Jump to content
SAU Community

Recommended Posts

hmmm....ok well ive got the new ps2 and i dont want to chip it. will this mod allow me to play ntsc original games?? thats pretty much all i want from it is to play jap games and possibly dvds. does this mean that if i copy the ntsc game onto the external hdd i should be able to play it??

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

Yes.

All PS2's play all PS2 games NTSC/PAL/SECAM.

The question is... does your telly support NTSC ??

If not there's still hope. There are appz that patch .ISO images PAL-->NTSC & vice versa. Half the games I have are NTSC from HK and they play as per PAL, no patching.

M'kay ?

OK just checked. did back to back testing with Gran Turismo 3, HD vs DVD load times tested on all the screens available from the main menu. There was between 40-60% improvement across the menu. That's with a WD 7200RPM IDE drive (WD's do fit). the cheap one with less buffer. An 8mb buffer drive would have fared a little better. it's in my older v5/6 PS2 .

the PSTwo's USB port might be an achilles heel. USB disk drives are hella slow on my PC compared to IDE, but on the PSTwo ? Try it & see Gushiken San, at best you'll never have to swap discs again at worst they'll be slow to load.

Scratch that.

Word around the traps is:

No HDD support for PSTwo :cuss:

No HDLoader support for PSTwo. :thumbdwn:

That's the official line from $ony

$ony concocted a story George Bush would be proud of as to the lack of HDD support in the PSTwo.

The truth is PS2 always supported HDD, $ony held back while M!cro$oft was losing $$$$$ on Xbox software revenues from piracy as a direct result of HDD support. It was a commercially smart move to make the network adaptor a critical link in the chain, and to play that ace later in the game.

This is the PSX vs PS1 history repeat. And the lesson from that was: Hold on to your old hardware, it's built to a standard not a price.

I just put a 200gb seagate hard drive in my ps2, running HDAdvance 2.1. I was extremely happy with the loading times, no more load on my ps2 laser. Its nice not hearing the laser struggling to load trees and streets while driving in GTA.

MidnightGTR - check this page http://www.zophar.net/consoles/ps2.html NeoCD emu there.

Neo Geo had the best shoot em ups, hands down. Definitely get a good digital joystick for neo games. Analog response time is too slow.

ABuSD - HDLoader/HDAdvance only supports PS2 games =(

  • 2 months later...

narkeh... bring your PS2, memory card, a PS1 game and a network adapter ($30 from EB) and I'll do it for you in 5 mins... I've got a memory card editor (so you can plug memory cards into your PC and edit the files on it, same one I used a couple of years ago to get the 9000hp Mines R34 GTR in GT3). So you don't have to f**k around with all this swap magic crap.

oh you'll need a hard drive as well so I can put D1GP on it for you :cheers:

I did Danny's PS2 with a 20gb hdd out of an old PC, and I did one of my mate's PS2 using the 8gb HDD he pulled out of his Xbox :cheers: Most of the tutes out there seem to think 40gb is the lowest you can use. Bollocks to that I say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...