Jump to content
SAU Community

Recommended Posts

I just plugged it in, pushed the kick panel back and drove it. No problems :-)

Most other PFC problems I have heard of are word of mouth (I know someone who tried it and ....) so I wonder if its just stories being told or if they did really try it.

Mine is in a series 1 R33, so it may be a model specific thing, I dont know for sure.

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

both have pro's n con's

i love my auto .... seems to hold boost a lot better than a manual .... the only time i wish i had a manual is when cornering.

i like to drag - so it suits those purposes perfectly.

The power your car makes is only limited by your budget and imagination ..... not whether its auto or manual.

Have you compared the shift quality to a non PowerFC auto 33 before you had the shift kit?

Shift quality didnt change when I put the PFC in the car.

Originally my shifts were good (tight) compared to other autos I had driven (Holden, Ford, Chrysler) but after the shift kit its VERY tight. (ie it will chirp tyres between gear changes, which it would only do previously when I had crap tyres on the car) :wassup:

OK cool but have you compared your car pre PowerFC to an auto 33 running the stock (auto) ECU...

I'm just thinking out loud here so don't take offence but perhaps your car originally had a manual ECU, hence the reason you didn't notice a change in shift quality...

Every single test I've done on auto 33's with a replacement ECU has resulted in a change in shift quality...

OK cool but have you compared your car pre PowerFC to an auto 33 running the stock (auto) ECU...

 

I'm just thinking out loud here so don't take offence but perhaps your car originally had a manual ECU, hence the reason you didn't notice a change in shift quality...

 

Every single test I've done on auto 33's with a replacement ECU has resulted in a change in shift quality...

Yeh same, its not just word of mouth, ive experienced it too. Wasnt TOO bad but it was enough.

why is yours different to everyone elses 4door?

the truth is all the gear logic and changing codes are gone, so something must have changed

what model of pfc have u got?

also did you take your car to MV with the pfc?

The PFC was in the car prior to going to MV automatics.

I have offered Sydney Kid a drive in my car next time he is in Adelaide (he didnt come to Mallalar last time) which may answer some of your questions and I believe others will value his comments and opinions.

Well firstly let me point out that i'm not taking sides here, i have owned both autos and manuals and both have their good points but i have to point out a lot of the complete crap that has been written here. It was mentioned briefly on the first page but wasn't brought up again.

I am assuming there are no engineers posting in this thread, because if there were they would tell you that some energy (and therefore power) is lost at EVERY linkage. Therefore seeing as the auto has more components and therefore more linkages it MUST make less power than a manual with similar mods.

There is no point arguing 'my auto skyline feels faster than my mates manual', you cannot argue with science. It has been proven over hundreds of years.

An auto skyline against a manual skyline with EXACTLY the same mods, the manual will win EVERY time, no arguments, assuming the manual driver can drive. Not wanting to open a can of worms, just pointing out some scientific facts. The reports i've seen estimate the drivetrain losses to be about 20-25% greater in an auto than a manual.

Cheers

:rofl:

at least this argument had facts to support it, thanks xxxx for providing a logical point of view. however in defence of auto's (remember I do drive a manual and i do think they are more fun) every person I know who races cars in drags (seriously) be it skylines or v8's or whatever uses an auto (mostly 2 speed powerglides for v8's) now all these people (plus all the ones I don't know, but see on tv) can't be wrong. now before someone jumps down my throat and says it is not the same as a normal stock auto, no maybe not but it is still an auto. the best way to determine this is do what i said before race an auto and manual. if slide is still in and has mods like mine or rwKW close to mine then I am happy to try it.

how long can a drag modified gearbox last in a daily driver? come on, surely its been tuned specifically for drag use only, with increased ability to handle short busts at high power.

as for the torque converter giving you more power... here's a few things to consider...

an official Nissan statement about the R34 says:

Nissan's new "E-flow Torque Converter" that increases power transmission efficiency to nearly the ultimate limit has also been adopted to reconcile smooth, pleasing power delivery with improved fuel economy for greater environmental friendliness.

Now from that I'd conclude that the torque converter delivers "power transmission efficiency to nearly the ultimate limit", which is that of a manual. I mean what else can you compare it to?

also... impeller, stator, and turbine in a torque converter all have energy loss, so even though the torque is being multiplied, what is being expended?

I'll try and grab the Brochures for the R33 manuals and autos and compare their power charts. Might give a better idea stock for stock.

i posted that b4 i broke my gb

runs like poo now

was hittin 187rwkw bfore and id say ive lost heaps of power

i were chirping 2nd sometimes 3rd most times but now doesnt at all

if you are going on the cruise on the 20th youll see it under good behavior

took it to an automatic fixer and he said i need an overhaul

like i said too much puttin in nuetral reving and dumping

if theres a track day coming up ill give you a drive if you want just dont crash it

http://auto.howstuffworks.com/torque-converter.htm

" In addition to the very important job of allowing your car come to a complete stop without stalling the engine, the torque converter actually gives your car more torque when you accelerate out of a stop. Modern torque converters can multiply the torque of the engine by two to three times. This effect only happens when the engine is turning much faster than the transmission. At higher speeds, the transmission catches up to the engine, eventually moving at almost the same speed. Ideally, though, the transmission would move at exactly the same speed as the engine, because this difference in speed wastes power. This is part of the reason why cars with automatic transmissions get worse gas mileage than cars with manual transmissions.

To counter this effect, some cars have a torque converter with a lockup clutch. When the two halves of the torque converter get up to speed, this clutch locks them together, eliminating the slippage and improving efficiency."

The PFC was in the car prior to going to MV automatics.  

I have offered Sydney Kid a drive in my car next time he is in Adelaide (he didnt come to Mallalar last time) which may answer some of your questions and I believe others will value his comments and opinions.

i dont know if i can wait that long, im almost at the point where i dont care anymore and will just get a pfc so i know everything will run properly :)

i hate dodgy shifts though, and its definately not good when u go to sell.

is there anyone else on sau near you that u can take for a drive to get a 2nd opinion? cos i dont understand how yours can be any different to all the other people who have tried it

i posted that b4 i broke my gb

runs like poo now

was hittin 187rwkw bfore and id say ive lost heaps of power

i were chirping 2nd sometimes 3rd most times but now doesnt at all

if you are going on the cruise on the 20th youll see it under good behavior

took it to an automatic fixer and he said i need an overhaul

like i said too much puttin in nuetral reving and dumping

if theres a track day coming up ill give you a drive if you want just dont crash it

Who did you speak to about getting work done?

Best places ive found so far is Mark asnea at morningside and Athena Automatics at wakerly

Im going to call up MV AUTO in nsw because they are experts on skyline autos, and see what he thinks is the best way to do it; Most probably get them to send me out their shift kit etc and get somewhere here to fit it

i dont know if i can wait that long, im almost at the point where i dont care anymore and will just get a pfc so i know everything will run properly  :D  

i hate dodgy shifts though, and its definately not good when u go to sell.  

is there anyone else on sau near you that u can take for a drive to get a 2nd opinion? cos i dont understand how yours can be any different to all the other people who have tried it

i dont understand either , im very confused .

:headspin:

is there anyone else on sau near you that u can take for a drive to get a 2nd opinion? cos i dont understand how yours can be any different to all the other people who have tried it

Yes there are others, but no one else on these forums has the sort of reputation that Sydney Kid has (other than myself :D )

Im going to call up MV AUTO in nsw because they are experts on skyline autos, and see what he thinks is the best way to do it; Most probably get them to send me out their shift kit etc and get somewhere here to fit it

The MV Automatics I went to is here in Adelaide.

1 Stirling Rd Blackwood 5051 (08) 8370 0430

Kirra automatics they are the ones to see around (more import knowledge in bris though)

im getting my uncle to do the conversion when ive got the cash and ive lined up a manual box privately

how long can a drag modified gearbox last in a daily driver? come on, surely its been tuned specifically for drag use only, with increased ability to handle short busts at high power.

Well my auto is about as worked as you can get. It is built to handle 800hp although i only have about half of that. It has a 4500 stall and is also daily driven. I have been driving it for two years now. The only thing that kills autos is heat. I find it easy to drive you just need to adjust your driving style, just like you would have to with a triple plate clutch. The only down side is that it uses more petrol than a manual.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...