Jump to content
SAU Community

Recommended Posts

i wouldve thought with my mph that i couldve done a bit better...may need some more practise.. :rofl:

i was launching at about 3k...

R/T - .486

60' - 2.189

330' - 6.027

660' - 9.169

mph - 79.13

1000' - 11.816

ET - 14.067

MPH - 101.05

Km/H - 162.63

At the time, mods were..

Whiteline suspension

pineapples

full exhaust - hi flow cat, dump pipe and cat-back

GTR intercooler

lightened flywheel & ceramic clutch

stock boost

Link to comment
https://www.sau.com.au/forums/topic/61755-timesllip-does-this-seem-right/
Share on other sites

Hey Adrian..

thanks for the advice.

When i slip the clutch, the ceramic combined with the lightened flywheel doesnt make the car too happy...thats why i was dropping it (as best that i could) at about 3k...

Im hoping the extra power the car is putting out will be controlled by the clutch if i slip it out while revving harder..

Hey Cameron - i actually thought my 60' was a bit lame. I would like to get it to a 2.0 flat..

Hey Adrian - Yep thats what im hoping for next time i hit the drags...My tyres are (unfortunately for drags) 18's....but i have 265's on the rear, so i may have a sporting chance...

Thanks SiksII - its great fun !!

i believe alot of it is how you drive your car and the track conditions at the time. my car ran 13.85 @ 101 miles/hr in Darwin of all places. it has similar mods, except i have standard clutch and no suspension mods at that time. Also still have stock intercooler. Like i said above, every 1 is different as to how they drive there car down the 1/4. It was 29 Degree's that night and the track is pretty slippery.

209kW and good tyres should see a high 12 if you can drive.  My car makes less power than that (193kW) and ran a 12.799 @ 105mph.

Adrian

Are u serious!?

first attempt at 1/4 about 6 months ago i did 13.8@104

spose that was launching at 2200rpm, but still your a second faster with 1 more mph :confused:

Are u serious!?

first attempt at 1/4 about 6 months ago i did 13.8@104  

spose that was launching at 2200rpm, but still your a second faster with 1 more mph :confused:

Yhe i agree with 2rismo. I ran a 13.4 @ 108mph wiht a clutch slipping in 2nd and 3rd gear, couldnt tell if it was clutch or wheelspin in 1st gear:( That was with a 2.4 6-ft time (i cant drive plus slipping clutch) and only around 180-200rwkws tops because if i ran more then 1bar then i had a miss.

So about 200rwkws (tops), slipping clutch and sh1tty 60ft i still ran a 13.4. Isnt the theory if i cut 3/10s of my 60ft then that equates to between 0.4-0.5 seconds thru the traps?!?!?! SO that means i woudl be looking at about a 12.9/13.0, then a clutch that didnt slip and im sure i would have been able to run a 12.8 (approx).

LOL, Splitfires and 1.4bar and i reckon i can give a 12.5 a nudge:)

There is a small but noticeable weight difference here. An R32 with 200 rwkw should run a fast ET than an R33 with 200 ya?

Looking around these forums I would hope to get 13.6 with my power except that then I remembered that I have a 4 door and it's heavier than a 2 door R34. Makes for better balance on the track but there is a little extra weight in it which may be making a difference on the strip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...