Jump to content
SAU Community

Recommended Posts

Hey guys,

how accurate are the standard R32 boost guages? Even after putting my 3 inch dump/front pipe in addition to the full 3 inch exhaust the boost is still only going halfway to +7. Surely with these mods it would have higher boost? How much gain would be had from boosting it to around 12PSI. I know of the issues with the ceramic wheels :cheers:

Link to comment
https://www.sau.com.au/forums/topic/62068-how-accurate-stock-r32-boost-guage/
Share on other sites

thats where your slightly wrong mate.

Putting on an exhaust on a stock turbo skyline will 100% give you a natural rise in boost to around 9-10psi up from the stock 6-7psi.

This is due to the backpressure being decreased massively and allowing everything to flow. Reponse it better too.

Cheers - ash

im getting 0.9 bar (13.05psi) from a pod and 3" (read with a HKS gauge). i bought the car as it is (Yesterday) so i dont know if ther are any other mods, cant see any from a brief look. is it possible that this boost gain is just from a pod and exhaust???

thats where your slightly wrong mate.

Putting on an exhaust on a stock turbo skyline will 100% give you a natural rise in boost to around 9-10psi up from the stock 6-7psi.

This is due to the backpressure being decreased massively and allowing everything to flow. Reponse it better too.

Cheers - ash

My R32's boost didn't change at all after pod, then turbo back exhaust and now FMIC. It reads 9.5 PSI on aftermarket guage.

Mine is abit weird...

I fitted a auto meter gauge myself and when driving im hitting 13~14 psi of boost...

mind you all i've got is cat back exhaust > airfilter >bov, nothing else...

....hmm hmm.....

Hasnt played up or anything but yeh....thought the r32gtst run 10psi stock and maybe the odd spike to ~12psi...

Thats funny cause the waste gate actuator on an RB20 is already round 10psi

And of cause response will be better with an exhaust.

thats where your slightly wrong mate.

Putting on an exhaust on a stock turbo skyline will 100% give you a natural rise in boost to around 9-10psi up from the stock 6-7psi.

This is due to the backpressure being decreased massively and allowing everything to flow. Reponse it better too.

Cheers - ash

they maybe 10psi, but the dont run that till you exhaust em

and just what planet are you from? The stock dump may be a restrictive POS but it aint gonna restrict it from getting to wastgate actuator opening pressure.

Perhaps if you ask him nicely Sydneykid will explain things for you...:flamed:

How does a larger exhaust explain the turbo running more boost than the actuator is rated at?

I don't think any one 'really' knows what the stock RB20DET actuator is rated at do we.

Its all speculation.

Even if we were to test it how would we determine it unless we were to get out hands on a bran spankin new actuator.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...