Jump to content
SAU Community

Recommended Posts

r33 Series 2 has different headlights and grill, so the bonnet is slightly different, it curves down where the grill is like the Gtst R32 compared wif GTR and similar to R34 GTT which also curves down. Series 1 doesn't.

So you can't fit a series 2 CF on a series 1 unless you change the headlights and grill, (unsure about the front bar) and vice versa

I have SmoothLine's bonnet it is one of the cleanest bonnets out there, looks the goods.

grepin: what will he use then???

Free BUMP

OK as I am in Adelaide it would be a costly job to send bonnets in both directions plus the fact I want to keep my origonal stuff. I guess if we struck a deal he might be able to buy one from a wrecker. Possibly with luck a white one to save painting cost or is that your car. If I know what area he lives maybe I could even try finding a second hand one somewhere for him.

Hi...just wondering if you'd be interested in swapping with my bonnet,. but its silver though..?

i'd take em for $500 + my bonnet is yours.

would you also send them down to QLD ?

how about you pay for shipping your bonnet to my end and i'll pay shipping for my bonnet to your end ?

let me know.

Hi...just wondering if you'd be interested in swapping with my bonnet,. but its silver though..?

i'd take em for $500 + my bonnet is yours.

would you also send them down to QLD ?

how about you pay for shipping your bonnet to my end and i'll pay shipping for my bonnet to your end ?

let me know.

$600 and I will drive to northside of brisbane to swap...

I live on the Gold Coast :(

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...