Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

its pretty much hard to say really..esp. with import cars...for sure most import had the odometer clocked back...when i purchased my r33 it was fitted with a GTR dash with has 40K on it...but the original dash has 85K on it and the car was imported on 2002..i've put an extra 5K on it since i got it,.now lets say my car has done 100K ( originaly ) well.. i have to say..it still is running smoothly for a fairly moded one.

just really depends on how you drive it and look after it...crash it and go R.I.P.

i'd say 35cm for a piace of string.

My r32 gtst made it to about a genuine 180k (based on a service sticker i found having 60k more than the odometer when i bought the car). Swapped the engine out as it was getting tired and blowing a bit of oil into the intake.

The last 60k were done with better than 160rwkw and the last 20k with 175rwkw.

Stripped the motor today and found everything was in pretty good condition considering, with a fair bit of blowbye obvious on the sides of the pistons and a bit of excessive wear on a couple of the big end bearings and some minor scoring on one of the main bearings. Other than that the bores still had obvious hone marks and there were no busted ring lands, damaged rings or anything like that.

and a piece of string is definately 30cm

Not necessarily... The faster you go, the shorter the piece of string gets :D So someone driving a highly modded R34 GTR might observe the same piece of string o be shorter than someone driving a stock R33 GTS-t for example...

All the nerds out there will understand what I'm saying.

How long is a piece of string?

easy and indisputable.....

double the string's centre to one side!!!! :wassup:

except for G-strings, more complex geometrical math is required here. :Oops:

not a RB - but my 1979 Toyota Celice has done 790,000 km's - same engine :rant:

i just service it every 15k and it's fine :rant:

umm.....so you get my point then?

Those 2 litres appear unbreakable, but 'truck' like!! :wassup:

I killed my RB26 with 62000k's on the clock, my RB25DE had a 114 on the clock when it was layed to rest and still went like a dream, i got it with 50 000k's on it and cained it everywhere, lots of drag and track days and it did about 30 000k's with a 75hp shot of gas running though it, in the few months leading up to the engine conversion i was trying to kill it but couldnt, its gonna go in a project car next year.

my r32 gtr has around 240,000kms on the motor, it's pretty stockish. It has had a modest power increase over factory however the improvements I have had done aim at reducing the revs and boost required to make the same power as factory. This still means my engine will now not last as long as if I had left it alone under the same servicing regime.

Basically the more power you have and use regularly the quicker you will need at least a bearing / compression ring etc. rebuild.

The concept that a worked engine (say race spec) is going to last as long as a stock engine with the power being utilised is for dreamers with no money. If you have no money then drugs, gambling and performance vehilces are a sure way to increase your risk of spiraling debt and depression. Have a nice day.

The RB series has been proven to bea very strong motor...

Its the heart of all skylines right back from the 31....

It has proven itself on the track/drags/rally and street use....

The life span is very hard to determine. As left standard and driven every day for an hour a day it should last longer than the panels (rust will take over before engine dies)... If boosted or NOS'ed, Drifted and draged every where then it aint gonna last that long....

Would you say a Big Block Chev is strong.... I would....

Then how come Top fuel dragsters re-build after every run.... Its cause their pushed....

That same motor reving at 2000rpm all day everyday would run for ever.....

It comes down to the build quality and treatment.... My 2c

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...