Jump to content
SAU Community

Recommended Posts

hey does anyone have any idears i have a rb25det neo in my r32 haveing some difficultys with air con

i put my air con into diagnostic mode and it gives me two faults one is water temp sensor witch one is this the one for the dash or the one for the ecu and also it faults on the sunload sensor and if the water temp sensor is the ecu one will it mater that its the r34 one

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/
Share on other sites

[if you did the diagnostic in a garage or low light situation it will come up with a sensor problem. I checked my on my R33 in the dark and it told me there was a problem with that sensor, did it in daylilght and there was no problems. I don't think it woujld stop your air con from working though. Do you know if the compressor is OK?

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1183029
Share on other sites

I have had ongoing Aircon problems. It WORKS, but its only full cold 18`c, but anything >= 19`c it runs at full hot. Suspected that my dash cabin sensor was the culprit, but Have since been informed by Powerplay that I'm missing the external temp sensor up the front in the bay somewhere. Just waiting to get it fixed and gassed :P

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1183645
Share on other sites

Glad it's not just me, having the same problems with my R32, compressor didn't want to spool up, when it did it cycled on & off without cooling the car down. Diagnostic check in driveway displayed sunload sensor code, was wondering where it is & how to get to it/fix/change it. Might also get the system checked to see if it needs regasssing. Had the car for a year, no dramas up till now. Any aircon gurus out there?

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1183981
Share on other sites

Mines leaking because the origional Compressor carked it, and had a new one put it, but apparently GTR compressors dont fit the GTS-t. They FIT, but one of the connectors is too big, hence the leak. Still waiting for Powerplay to get back to me about a replacement.

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1184558
Share on other sites

Water temp sensor for a rb20det is the same as a nissan maxima v6 model... Yeah paid $60 from nissan... Fitted in 20 seconds with a bit of thread tape....

Had the same water temp sensor in the same car, Neo 32. Replaced the sensor with a part from nissan (~$70) aircon works fine now.
Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1188585
Share on other sites

I have had ongoing Aircon problems. It WORKS, but its only full cold 18`c, but anything >= 19`c it runs at full hot. Suspected that my dash cabin sensor was the culprit, but Have since been informed by Powerplay that I'm missing the external temp sensor up the front in the bay somewhere. Just waiting to get it fixed and gassed :P

Hey Jordan, I have the exact same problem. Its a real pissa when u dont want it to be that cold but its too hot to roll the windows down. Could you do me a fav and pm wat the problem was, cause i'll be wanting to get that fixed. Thanks man. I wonder if we are the only ones with this problem.

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-1192347
Share on other sites

  • 12 years later...
On 02/02/2005 at 10:01 PM, GroundRun said:

Hey Jordan, I have the exact same problem. Its a real pissa when u dont want it to be that cold but its too hot to roll the windows down. Could you do me a fav and pm wat the problem was, cause i'll be wanting to get that fixed. Thanks man. I wonder if we are the only ones with this problem.

Sorry for reviving an old thread.
I have this exact issue for my R33 Type M GTST here in Japan. What was the fix. It's driving me insane!

Link to comment
https://www.sau.com.au/forums/topic/62696-air-con-problems/#findComment-7827364
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...