Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Why not start a hall of shame of all the Fake gtr's out there? Or why not have a comp to see who can get the most pictures of GTR badged Gtst's out there?

Thats a great idea :(

The real problem is that it devalues the GTR name. You have people in their POS 14sec car believing that they can pwn a GTR in a race.

There's a few of those fake GTR's around Melbourne too. The worst I've seen was a stock series 1 with a GTR badge. My stupid friend said wow! GTR!!! (He was actually serious) It was even in that blue R33 gtst colour which I dont think they made a GTR in.

Aren't stickers considered rice only if you DONT have the parts?

Anyway, a more printer friendly 'NOT A GTR' pic.

The funny thing is that if someone gets this they'll be freaked out by the fact that someone took the time to make and print out the page because they hate their mis-badging.

I have a definate passion for skylines, the way the drives, but I also avoid buying a gtr for reason other than cost. To me anycar can go fast with time and money, and the draw back of owning a gtr is that it has street cred and is also a thief magnet.

A guy at work owns a GTR with no badges cause of all those ar$eholes out there keep stealing them.....

As for my line, mines not longer a GT as i took them off before some else did with a screw driver...

after driving along on a sunday i started to relize just how many fake GTR's there are, and some1 has to put a stop to this, its wrong! (thats why i started this thread)

either these badges are sold in bulk daily like bread or GTR owners around australia have had their badges taken.

I dont mind if the driver admits and says its a GTST but to carry on and make it as it actually is a GTR by having a bodykit, spoiler, engine or twin turbos...., its just wrong!

After i had an argument with some1 the other night regarding this i could not wait to get home and start this thread, this gtst owner put a twin turbo set up on his rb25, and him and his friends who had honestly no clue what a gtr is went along with it claiming if u add a twin turbo set up on a gtst the car magicly becomes a GTR, wow thats a nice trick, so i asked what u call a gtr with a single turbo conversion? a gtst i dont think so!

Please if u have GTR badges on your skylines i dont care but DONT claim and try to tell others its a GTR...! its not!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...