Jump to content
SAU Community

Recommended Posts

I can never understand why people do this!

If the engine bay looks dirty then use a rag and clean it by hand!  

water and electrical connections do not mix!!!!!!!!!

I live on a dirt road. Cleaning with a rag isn't an option.

Besides, other reasons could be oil leaks etc. May have to degrease to find where the oil is really coming from.

There are many reasons to do it. Just gotta do it right so not to harm anything.

High pressure however is a HUGE no-no near engines IMO. If I can get 3 inch of clay of a dirt bike engine that has baked on there, with not more than garden house pressure, I can't see the need for a high pressure hose on a car engine!

Ah I knew I read something on here not long ago.

Here is a guide for detailing your car.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=47397

and http://www.carcareonline.com/viewarticle.aspx?art=4 was one of the links within the thread.

thx heaps for the feedback guyz,

yeh im definately not doing that again.

anywayz so ive disconneted all the terminals and ive let them sit

will that be enough to solve the problem?

btw where is the coil pack? and yes i do have a pod but being the dikwad i am i didnt cover it, how do i fix it?

dude, if u have wet the pod filter. STOP running the car...you want to get all the water out of everywhere first. It seems you have been running it a fair bit, so with a bit of luck it is just the coil packs.

My advice would be to not start the car until you have checked out the things mentioned above.

Do a search on coil pack servicing

Pod filter - I'd disconect it, sit in the sun until it is TOTALLY dry. See if water has gone up the pipe between the pod and the engine, if it has, might pay to remove the pipe, make sure it's all gone.

If you have water in the engine it is a VERY bad idea to be turning it over.

I am used to drowning dirt bikes, but not cars, I would assume it's the same idea, any place that water may have got, check it out, clean it out, dry it out.

On bikes after all that, you take the plugs out and turn it upside down and turn the engine over to get it all out....but I am guessing you don't do that with cars! hahaha (how funny would that be tho..*mental image*)

i know what your saying ? i say there is water traped under your coil packs as ive had the same thing happen to me i just pulled all my plugs out clean the packs with CRC and plugs put all back and done problem fixed ? and while your plugs are out turn your motor over blow any water or moist out of the bores if u have any good luck with things

When cleaning the engine bay a high pressure spray and degreaser, I made sure to cover the air filter with a plastic bag. I forgot to take the bag off afterwards but luckily I remembered just before I drove off. The car would have had a hard time breathing that's for sure.

We used to jet wash engine bays in one of my detailing jobs. Cover the fuse box (if under in the engine bay) and the alarm siren box. Quick flick over with a truck wash canister, then three times accross the bay with the jet wash to form not much more than a mist.

We always left the engines running as it would be hopeless trying to start it if something got wet.

Any idea of quantity of water or time spent purely on the engine bay with the jet wash? Seconds or minutes?

Hope it sorts itself out mate

I would get a high pressure airline and pull all of your electrical connectors apart and blast all the moisture out then spray with WD40 or similar product. Pull the coil packs out and do the same to them. dry your fully sick pod filter and put that back on.... You cant have done much in the way of damage. If the car sounds like it is missing its most likely because there is water in the coil packs and its shorting out... Just be carefull next time you wash...

P.S unless you had the hose on the air filter the engine wouldnt suck in enough water to hydrolic lock the engine so dont worry about that dude.

dry her out and then take it for a good run to get everything hot and the remaining water will evaporate and you be sucking the doors of HSV's and WRX's before you know it..

ENJOY!

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...