Jump to content
SAU Community

R32 VS R33 GTST's

mofodm

By mofodm,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

CerealKiller Veteran

CerealKiller

Posted
Posted
ive never driven a R33 but it does seem it has more torque at the start than a R32. however once the R32 hits 3revs and over it lets u know its a skyline!!! :D

same would apply for a R33... but in a straight line launch you wouldn't start from below 3,000rpm

predator Grand Master

predator

Posted
Posted

R33's are faster.. have more room, and are more modern.

R32's are more compact, feel more sporty, and have more direct and better handling

I've owned both, and the R32 already feels much better. With an RB25 engine, it would clearly be the fastest and better handling car.

Panikin Collaborator

Panikin

Posted
Posted

I have both an R33 & R32 sedan with FMIC,3" from turbo, T/s plumbback, on both, the 33 is quicker and feels alot more refined but for those sideways adventures and tight corners the 32 feels much more responsive.

The 33 is now running lowered spings and both have camber & caster adj. bushes set up for sport and the 33 only just comes close to the feel of the 32.

Never raced them together(can't drive 2 cars at once)so I'm going by speed and feel on same stretch of road.

stock the 33 won hands down for being quicker.

$ballin$ Enthusiast

$ballin$

Posted
Posted
R33's are faster.. have more room, and are more modern.  

R32's are more compact, feel more sporty, and have more direct and better handling

I've owned both, and the R32 already feels much better. With an RB25 engine, it would clearly be the fastest and better handling car.

Yeah i totally agree, the R32 makes up for its sportyness feel. Here in the NT we have no speed limits on the main highway and i pushed my R32 all the way and its got superb handling, all 4's stick to the road.

  • 2 weeks later...
Cubes Grand Master

Cubes

Posted
Posted

My experience in the past

My R32 used to run 12.5psi and made ~150rwkw with only an exhaust.

A friend with an R33 was running 11psi with a pod and exhaust.

The R32 used to pull away from the R33. Not by much but it was slightly quicker.

My R32 also used to sit dead smack even with another friends dead stock R33 GTR (Stock exhaust and all)

BUT... Once you begin to fiddle with the ecu on the R33's they leave the R32's for dead.

Dead stock R32 vs dead stock R33, the R33 is quicker.

Very mild exhaust and boost R32 vs very mild exhaust and boost R33, the R32 is quicker.

I put this down to the ECU in the R32 handling the mods a little better than the R33 as the R33's tend to have slight power dips and run very much rich!

Nismo_Boy Grand Master

Nismo_Boy

Posted
Posted
R33's are faster.. have more room, and are more modern.  

R32's are more compact, feel more sporty, and have more direct and better handling

I've owned both, and the R32 already feels much better. With an RB25 engine, it would clearly be the fastest and better handling car.

Your R33 was manual, and your R32 is auto.. You can't compare them really Gordo.

My R32 vs unknown R33 I found on a *private straight part of road* I won by a half car length. I only made 140rwkw as well.

I’ll admit once you start and play with the R33 more, it’s a quicker car, but with the normal basic bolt on’s – The R32 is quicker IMHO.

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

ive got a r32 gtst and my bro has a s2 r33 gtst

overall id easily rather do up an r33 ... its just soo much nicer on the inside plus dual airbags... havent driven a stock r32 for handling but mines on teins and it handles like a gun the steering on my brothers feels a bit airy but i think we aftermarket suspension it would handle fine

we are both putting out about 190rwkw and when we raced he beat me on the start got a lot of wheelspin but after shifting to 2nd the r32 took off ahead but mines pretty heavily modded

but if your cashed up go a late model r33

predator Grand Master

predator

Posted
Posted
Your R33 was manual, and your R32 is auto.. You can't compare them really Gordo.

My R32 vs unknown R33 I found on a *private straight part of road* I won by a half car length. I only made 140rwkw as well.

I was mainly getting at how they are to drive, the handling, the "feel" of driving and sitting in one, not necessairly the straight line performance. Through the mountains the other night, the R32 was much better totally stock, and crappy auto as well.. than the handling of my old R33 ever was.

anyhow, the r32 will be manual soon enough..

I'm going to stick the RB25 turbo on the r32 in a month or so.. that will be interesting.. as the stock 32 turbo is a bit too undersized for the engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • tridentt150v
      S A U N S W Club Membership

      By tridentt150v · Posted

      Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
    • luke gtr
      Did tie rods. Steering now not "springing" back.

      By luke gtr · Posted

      Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • luke gtr
      Returning after a long time!

      By luke gtr · Posted

      I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
×
×
  • Create New...