Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

for all of you in here that are saying your bovs flutter.. you are mistaken.

that is not your bov making the fluttering sound.. It is CAUSING the fluttering sound, but not making it..

If the bov doesn't open at low boost, the air doesn't come out with a normal psshh or squeek in the HKS ones, it goes back through the turbo and goes.. ffftt tt tt tt tt tt

And someone mentioned the turbo the WRX rally cars use..

Rally cars do not use Bov's..

That sound is still the sound caused by the air going back through the turbo, but when you add anti lag to it and different intercoolers and turbo blades and so on, it has that weird high pitched fluttering sound.

I had the R2D2 on mine and it was runing rich.

so I put the standard thing back on. I didn't like how it would have a constant sssssssssssssssss sound on cruise sort of loads so I now have a GFB plumback one which just makes a weird muffled FFTT HHHHHHHH sound on gear changes.

I personally like the sound of the HKS SSQ bov but I don't like having a full atmo venting bov.. the car just doesn't feel right..

ROY, I don't think that that white supra from the Best motoring video had a bov did it? it was making a really loud fluttering/skidding sound..

Originally posted by DR GTR

Twin Blitz ON a GTR is wicked. Its sounds like a monster

Werd!

Awesome when you lift off throttle slowly at high boost! Hear both go off one after the other.

:werd:

i had a blitz mounted right next to my 'cooler on the '33 - anybody that heard it could confirm that it was INSANELY loud (you could hear it from the other end of the harbour tunnel)...

I have a brand new blitz on the 180, it is set really tight because i am still running standard boost, but will soon test it out once i get more stuff on there.

i reckon the sound my pod filter makes is loud enough... nice and legal too :D

it makes a nice psshhhhhhhh noise when ya come off the throttle, i looked at the factory BOV and it looks like it would flow more than enough air for the boost i'm running.

51jay runs 14psi through his factory turbo at the track and the standard BOV holds its boost just as well as the GFB hybrid one he has now.

At what point is a BOV actually required, i will probably run about a bar through my turbo when i get a boost controller. Is there really need for a aftermarkt BOV at that level?

Guest U ZCREAM
Originally posted by Strich9ine

Blitz SUCK ASS...

I have one and it leaks, causes stalling problems etc.. how do I adjust this thing ????

Yea you need to adjust the spring cuz you're letting too much air out causing the engine to stall.

My vote for best BOV is Blitz. The apexi is good cuz of the price, but some have been recalled cuz they sometimes detach from the flange while driving :eek:

Plus they can't hold much boost and rust over the years

i reckon the sound my pod filter makes is loud enough... nice and legal too  

it makes a nice psshhhhhhhh noise when ya come off the throttle

...ummm.. pod filters are ILLEGAL for street use..

So you might not get fined for the stock bov but you WILL for the pod filter.

Unless you paid a couple of hundred buck extra to get an engineers certificate saying that your pod filter meets all the regulations..

Originally posted by GTST

 

...ummm..  pod filters are ILLEGAL for street use..

So you might not get fined for the stock bov but you WILL for the pod filter.

Unless you paid a couple of hundred buck extra to get an engineers certificate saying that your pod filter meets all the regulations..

Not all pod filters are illegal... Paper non oiled (like simota etc) are fine... it's only oiled ones like K&N or HKS etc.. that are illegal due to the oil entering the atmosphere as an unknown pollutant.... I know it's BS but thats the rules....

Doc.

Another handy side feature of running a MAP based ECU - no potential atmo BOV related AFM/stalling issues :D

Mick51,

The factory GTS-t / GTS25t BOV can flow more than enough air *up to a point* I never had a drama with my standard BOV until about the 220+rwkw mark. It wasn't that the valve leaked, it just wasn't able to flow enough air, which resulted in compressor surge (fluttering sound - NOT good).

I now use a GFB "Basic" It's cheap & outflows almost all the other GFB BOV's (& quite a few others!). After all the whole point of a BOV is to dump pressurised air on closed throttle, so the BOV's CFM rating is what really counts!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...