Jump to content
SAU Community

Recommended Posts

HI all

OK i dont know if i have a problen here and i was wondering if someone could shed some light on this.

When i forst got the GTR up untill just recently it used to really hammer. and looking at the torque gauge on the dash it would rarly go to the front wheels, would when i launched and if i changed gears hard but once moving it would show 0 to the fronts and really hammered. Recently i have had new tires and a wheel alignment done. now it always seams to show around 10 on the gauge, if im just cruising around it wont but as soon as i put the foot down doesnt matter what gear what speed the torque gauge will go up and will stay there till i take my foot off, because of this it doesnt seam to be as quick when its up and moving still lightnight of the start but once moving i can feel the lack of power because its going to the fronts when it used to be all at the rears.

Would anyone know whay this is??? cause im not sure which way is normal.

also i was driving say a month back and one of the wheels came loose and my torgue gauge was up and down like a yoyo but once i got new nuts for it it and it wasnt moving around the car went back to normal, so im guessing the wheels can change this is some way, so did the alignment make it the way it is and how do i ge it back to the way it was??

cheers

Link to comment
https://www.sau.com.au/forums/topic/65072-question-about-an-r32-gtr/
Share on other sites

The 4WD is directly integrated with your ABS sensors. Are you having any problems with your ABS?

The torque split control should be active when you power down. The more slip it gets in the rear, the more torque is applied to the fronts.

You could take it on a dyno and have them diagnose it for you. You would also be able to get an indication of it's power. Sometimes, well I know I did, you get used to the power and it doesn't seem to go as quick. I'm not sure if your is the same but the dyno would explain it.

What complete utter crap!!

How is ABS dangerous to drive with? ABS can activate/de-activate a 100 times quicker than your brain/leg/foot can so having ABS makes you certainly no worse off than not having ABS.

About 3wks ago I was dropping a friend off home in my estate at 2am on a very windy road (50km/h) when I came around a sharp blind corner to find some dickhead put 2 old tyres right in the middle of the road. I slammed on the brakes (activating ABS) and 'turned' around them (thankgod for the smooth curved gutters otherwise i'd have no frontbar) and drove along the side of the gutter.

I'd put money on it that without ABS you would have driven straight into the 2 tyres ripping your frontbar off whilst your front wheels were pointed towards the side gutter.

Now back on topic....

Learn how to drive instead of relying on driving aids would be my motto. Dosen't take much to learn how to cadance brake. ABS makes up for what a good driver dosen't have: so overall yes it is good to have on a road car.

Nugget what size front and rear tyres do you have

My torque guage starts to move as soon as i start boosting. If i take a corner hard and power into it, guage goes way up. Always has been like this since i got it. If it's constanly on 10, you have tire size issues. I got a flat and chucked the Nissan cheese cutter (space saver) on, i have 17", cheese cutter is 16", and my guage stayed on 10 all the time.

Can't argue with Morgs on this one. I have trouble activating the ABS, because I've learned to threshhold brake.

...I slammed on the brakes (activating ABS)...
This is Morgs point - a properly trained driver would not have done this.

As for throwing away the fuse - if you don't want AWD, then don't get a GT-R!

Now, back on topic - Nugget, did you replace all 4 tyres? Did you replace them with the same type / size at each corner?

This is Morgs point - a properly trained driver would not have done this.
Bad choice of words, it was a figure of speech. However driving in pitch black around a corner sweeping corner, black tarmac road, 2 black tyres sitting in the middle, doing 50 in a 50 zone and good luck without ABS is all I can say.

ahh cmon even the best drivers will hit ABS.

on the track is different, same corner, surface, tyres and you did it all 2 min ago.

On the road you have different surfaces, hotter or colder tyres, hotter or colder day and road, oil/dust/debris on the surface. No way you can be *sure* of where the threshold is until you go over it...then ben's point come into play....by the time you feel or hear the lock up ABS would have pulsed 100 times.

Most likely if you aren't hitting abs or locking up you aren't braking hard enough...often people think they are getting the most out of their brakes, but when someone shows what they can really do, they are amazed.

Give me ABS on the road any day.

BTW I was watching an interesing video from 1991 the other day of the winfield GTR on slicks and a standard road car pulling up. The standard road car with ABS was 10m less :cheers:

Sorry about the OT....my guess is your front and rear tyres are different sizes. You need to get it fixed ASAP either way because it will excessively wear your transfer case.

Hey Duncan well said. And Morgs do you think Nissan fitted ABS to GTR's just to look after "unskilled" drivers? No. The reason they fitted it is because that it is the best system!! By your estimations Grand Prix drivers are "bad" drivers because they lock brakes occasionally!! They lock brakes because they are pulling 6G under brakes with NO ABS not because they don't know how to cadance/ threshold brake!! If you are so skilled can you left foot brake your GTR and downshift clutchless? When you can maybe you could give us all some driving lessons! How is it that someone who has been driving for ten minutes assumes they are great and everybody else is shite?

Point is this. If you don't like ABS, that's fine. Don't buy a car that has it.

But don't tell someone else to do something when you don't know enough about it yourself and, in turn, causing them to be without something they have grown used to over the period they have owned the car.

Go ahead and pull your own fuse out. Don't tell other people to when it could result in someone's loss of life. And if you do advise it, make sure you have the knowledge and experience to tell them what happens when you do.

Hey Duncan well said.  And Morgs do you think Nissan fitted ABS to GTR's just to look after "unskilled" drivers?  No.  The reason they fitted it is because that it is the best system!!  By your estimations Grand Prix drivers are "bad" drivers because they lock brakes occasionally!!  They lock brakes because they are pulling 6G under brakes with NO ABS not because they don't know how to cadance/ threshold brake!!  If you are so skilled can you left foot brake your GTR and downshift clutchless?  When you can maybe you could give us all some driving lessons!  How is it that someone who has been driving for ten minutes assumes they are great and everybody else is shite?

Perhaps you should relax and re-read my and your own statements before coming to such ridiculous assumptions about my driving experience, and stop putting words in my mouth.

I've never had to activate ABS on the road because I am overly cautious.

Or maybe you don't brake hard enough in the first place?

Perhaps what you and I do on the road is a different story.

I did not claim to be the best driver in the world. Perhaps if your comprehension of what am I saying was as good as your 'lecturing' skills then we would get somewhere with this discussion. We are all entitled to our opinions and if you so choose to resort to personal attacks this I will be the bigger man and let you have the satisfaction of letting you have a go....

Sure ABS is the perfect system - theres no argument there. What if a driver steps from an ABS car to a non-ABS car, with the assumption in an emergency that the fastest way to stop the car is to trump the brake pedal onto the floor? See my point now?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...