Jump to content
SAU Community

Recommended Posts

Originally posted by Gradenko

DON91E, the 98+ RB25 made 206kW, compare late model SR20s with that if you really must. But really, its pointless comparing stock outputs of differently sized engines.

O shit aye whoops how did i forget about the humble R34 :)

hehehe

Hmm yes that is tru, the sr is not too far off but is it :)

hehehehe

Look i reckon when it comes down to it, its really up to you,

With Meggala's comments, the build quality is not lacking to say the least but its a cheaper car now isn't it,

why don't we have cefiro 's hehehe cuz we not old men pushing around cribs with rings on our fingers ;) heheheh Jk, (o tell us more wise one)

hehehe

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

the cefiro is much cheaper than the chaser and is a nissan and it is a combination of the s13 and r32's the only hassle with them is they never came out in amnaul in the turbo model and they ahve a foot emergancy brake and sincle spot brakes with 4 stud wheel

but yes they can look very fat. and you can fit your nissan engine of choice rb20,25,26 or sr 20

meggala

driftspeccefiro.jpg

Originally posted by meggala

the cefiro is much cheaper than the chaser and is a nissan and it is a combination of the s13 and r32's the only hassle with them is they never came out in amnaul in the turbo model and they ahve a foot emergancy brake and sincle spot brakes with 4 stud wheel

but yes they can look very fat. and you can fit your nissan engine of choice rb20,25,26 or sr 20

meggala

 

driftspeccefiro.jpg

Megs there is a shit load of cefiro's here n taiwan. I seen a few pimped out to the max and they look damn good!

Meggala,

The pic shows it's 5 stud wheel? And the owner's been no good with that car, the rear bar seems to have been smashed prob when drifting...

My parent indeed almost bought one back home, but since Nissan's used car value is very poor there, they didn't buy it. But I wouldn't care as Indonesian version of Cefiro are ALL non turbo. (Back then there was still restriction on luxury and/or any cars larger than 3.0 litre engine due to the old regim govt's crap abt creating social gaps between the poors n riches)

Originally posted by meggala

the cefiro is much cheaper than the chaser and is a nissan and it is a combination of the s13 and r32's the only hassle with them is they never came out in amnaul in the turbo model and they ahve a foot emergancy brake and sincle spot brakes with 4 stud wheel

but yes they can look very fat. and you can fit your nissan engine of choice rb20,25,26 or sr 20

meggala

well well this topic allways starts hehe =)

as for me personally iam imporinting a 180sx 97 with updated interior i mist admit that the skylines have nice interior. better than the 180sx very early models.

i love skylines woundnt mind one my self. but honestly there are too many around. i live in melbourne. I just see heapz of them around because they are getting cheaper and cheper, and also the rush with the new law comming in thats why iam getting a 180sx. somthing a lil differenet.

as for skylines. great good engines but i feel they are too big.

as for 200sx. i think there ok abit heavier than the 180sx iam preety sure and i dont like there handling capabilites.

i think the 180sx have better handling than the 200sx.

but in the end it all comes down to personal preference.

me iam now a 180sx man. basically beucase i didnt wanna be another typical skyline on the block.

I agree with you in regards to interior.

One of the reasons why I bought skyline is I liked the interior better than FTO (almost bought that one). FTO may have sexier body, but I HATED the interior as it squeezed on me, I sat with the car dealer on test drive and we are rubbing shoulders!!!!!!

And I'm not even 6' high!!

R33's interior is more livable, as it's more spacious and looks a bit more modern than R32 or early 180sx. But again, it depends on indiv's preference... I like interior styling circa mid 90s or later, anything older than that, I felt pretty drab.

Originally posted by Jay95R33

Two dolla suckie suckie..... :lol: :bahaha: :bahaha:  

Love you long long time :bahaha: :bahaha: :shake:  

p.s. - bring back one for me too - one that can cook and polish cars well  :D

cook and polish a car? what if she just sucks great di*ck?

i am one of the lucky people to have experienced owning both great cars, current ride is a s15, previous ride r33 GTST

in my view, the s15 beats the r33 mod for mod mainly due to the new technology being installed in the 2002 model i drive

it has r34 suspension aspects and the light weight makes it hammer through corners alot better

the power comes on alot faster and the car is stock, the r33 had power come on alot higher but kept going in the powerband, the s15 comes on fast and in higher revs loses out

i havent modded the s15 but feel it to be faster then my skyline, hell, my s15 can beat a 8psi s14 with a 3in full exhaust and i am still stock

it does come down to driver, the way the engine has been treated would also affect in some way i believe

i sold my skyline and the guy blew the engine up and also found a crack in the diff. lucky for me!!

:)

so i choose s15, still love skylines however, even though there are like 500000000 of them out there

s15 looks alot better anyways, cant wait to start modifying it

Have to agree with u! Ran two S15's (Spec R) last week, lightly modded. First gear pretty much even and 2nd pulled away quite easily. Having that said my car is boosted n thinking back if my car were stock he would of had me on the straight and bends.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...