Jump to content
SAU Community

Recommended Posts

heya

maybe i'm just paranoid but do any of you guys experience the back sliding a bit (oversteer?) when going 90 degrees at medium/large sized roundabouts at about 50-60km/h?

just wanted to know whether it is normal or whether the problem popped up recently (didnt really noticed it) until the heavy rain few days ago

thanks

edit: i've read that this is due to HICAS?

Link to comment
https://www.sau.com.au/forums/topic/65786-re-traction-and-oversteer/
Share on other sites

They say the best control system ever is the one between your ears:)  When driving make sure the brain stays connected to the right foot:)

Thats fine, but unfortunately in my car there is a loose nut behind the wheel

LOL...well thats funny, mine comes with a tool behind the wheel.  

What came first the tool or the loose nut:confused:

Well that all depends on if the nut became loose, or was loose to start with doesnt it.

Also remember that if you haven't had much rain lately and then you get a downpour that the road will be greasy and slippery until all the crap is washed away.

Gosh, I hope it rains soon, so some of the crap on this thread gets washed away. :wassup: :wassup: :wassup: :wassup:

To add some more fuel to the fire.

I find it really hard to induce oversteer on a corner at those speeds unless I really give it a hell of a lot of throttle. But it has a lot to do with suspension setup and tyres etc. Maybe your tyres are starting to get worn on the inside? I noticed a lot more oversteer when my old Toyos were getting a bit thin on the inside.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...