Jump to content
SAU Community

Recommended Posts

Hi to all,

I'm need here, stumbled here when i was searching the net for reviews of the R32 GTS... couldn't find any though. :rofl:

I'm driving a AE92 Seca Corolla at the moment, and i'm thinking of upgrading to a 4 door 32 GTS. Mainly because i'm still a young driver, and reasoning with basic logic, turbo = more air in = more power if more fuel in as well = not a very good fuel econ figure.

I really want a review on the 32 4 door GTS... i really like the look of the 32, and the 4 door because of its practicality... but what are the real world economy figures for the RB20DE hauling a heavy (compared to corolla :cheers:) body? Is it underpowered? Anything R32 GTS owners wanna share?

Thanks heaps for all your replies.

Cheers,

Jon

Link to comment
https://www.sau.com.au/forums/topic/67627-rb20de-r32-4-door/
Share on other sites

http://www.autospeed.com/cms/A_2278/article.html

You need to pay to get a membership. I bought access to all the back issues (304 issues) for $80. I reckon it was worth it, but it depends how much time you would spend reading an online magazine. I think you can buy just the one issue for like $4 if thats the only article you want to read...

So long as it's the DE not the E then i think you'll enjoy it.

However, 4 doors are already harder to find than coupes, and most R32's are turbos so you're narrowing your options yet again.

Also have you contacted any insurance companies and found out what the price difference between cover for NA and Turbo? In my experience there's not a whole lot, the fact it's a Grey import works against the most, Turbo usually only adds a few hundred to Comprehensive cover and almost nothing to 3rd Party Fire/Theft with little higher excess too.

i'm not really concerned about the insurance point of view, because as u said, its a grey import, therefore the cost is already there; turbo or not it doens't really matter.

I'm concerned about the fuel ecnonomy aspect though, with the turbo... not sure how it would affect fuel economy. And also the weight of the R32 4 door might be an issue too.

if you are buying one, you better do it quick before the 15 year free for all ends, as a 4 door N/A will not qualify as a SEVS vehicle because it dosen't meet power to weight ratio requirements.

As for a GTS, my daily driver is one, great economy, better performance than almost all the other alternatives that are in the same category. RWD, handles well, reliable, can't complain... insurance is only $1200 p/a for full comprehensive as well over 12 monthly payments. Mine's a coupe though, but the 4 doors aren't that far behind.

If i was you i'd just be buying the GTS-T 4 door instead of the GTS 4 door, as they are pretty much the same in fuel economy, it all depends on how hard you drive it, and if you decide later on you want more power, which lets face it, we all do its much easier with the GTS-t

David

whats the widest tire width that could fit on the R32 GTS?

i think the GTS only has 4 studs ... so what would be the optimum size for performance?

as far as i know, for my corolla 1.6; 15" is the best on the track, due to its lower inertia and is wide enough to do the job.

also, is engine transplant a usual scene in the skyline world? In the corolla world, we normally get supercharge frontcuts and transplant the bugger over. Cost around 4K all up. i'm tihnking maybe if i outgrow the GTS... maybe plonk in a RB25DE?

I know first hand a RB26DETT bolts straight up to a RB20DET gearbox, the RB25DET would too, and i would assume it'd do the same with a DE. If you want to go for torqe you can always twin-cam a RB30 with turbos.

If you get the RB20DET out of the box you can push respectable power out of that too, but you're always going to be down on torque compared to other RBs. The other advantage of a DET is if you get a Type-M you've already got some awesome brakes with no need to upgrade unless you're doing a fair bit of track work.

The previous question of rims, I know 9.5" fit on the rears and 8.5" on the front, but you'd struggle to get any more on stock guards, esp. the front.

ic...

thanks for all the info guys.

so now i assume that if i actually get a GTS 4 door, i got a few things against me:

- insurance, since its a grey import, might as well get it turbo

- 4 stud wheels instead of 5

- brakes can still be upgraded

and the pros:

- cheaper

- economical even though u drive like a wanker

- if it gets slow, might as well mod it with the "works" ie 2.5L/ 3.0L RB stick some hairdryers, put some nice brakes... and its ready to roll...

....rb20det is pretty dam economical ...i get 11 to 12L per 100km city driving which i think is really good ....and 8 per 100km highway driving

u aint going to get much better than unless u get a smaller laser or corrolla.

my last car with a 2.4 L motor got min 14 in the city and min 10 on the freeway....it was an NA car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...