Jump to content
SAU Community

Recommended Posts

Anybody want to discuss the article itself?

I don't know why they used a cheap fibreglass N1 bumper copy on the Aussie Group A GT-R... also those mirrors look like they belong to a Caterham Super 7. It's interesting to note the smug content Gibson Motorsport had with the Group A GT-R, they *knew* they were going to win even in pre-season (well I suppose blowing away the Sierra Cosworth times would do that), it was just a matter of warding off DNF's/reliability issues.

Someone host the PDF instead of having poor old Mark send it to so many email addresses :)

Ok, here it is: http://www.ksgarage.jp/groupagtr.pdf for a short time only...

Right click and save as!!!

I'd love to know more about what's what in the engine bay. I've rarely seen a race engine - what's the aluminium box in the top right of the pic?

And is the strut brace setup better than a bar or just different?

Rezz: I'm assuming that you spotted the bumper as a copy as it's a one-piece?? and thanks for the hosting

edit: found another mention for the Aust GT-R. Not terribly informative, but the 1990 price tag is interesting.

I was at the Clipsal 500, and they had the Winfield GTR there, good thing was the 90% of the people were one eye V8 bogans, so i got a good look at it.

could i have the PDF to [email protected] please?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...