Jump to content
SAU Community

$30 Dyno Runs! - Chip Control Mini Dyno Day 4th April

RBN1

By RBN1,
in Archived Events

 Share

Recommended Posts

RBN1 Mentor

RBN1

Posted
Posted

hi guys,

Chip Control - the company that is sponsoring my R32 N1 GTR race car is holding a mini dyno day on 9th April. Why so cheap? Well Scott Hendren the owner has replaced his old dyno with a brand new Dyno Dynamics Dyno and wants to give it a bit of a run.

All you have to do is go to http://www.chipcontrol.com.au register on the forums and send Scott an e-mail letting him know that you are coming.

Note : there will be no tuning just 2WD dyno runs and Chip Control is located in Sunbury. I will post more specific info like times etc early next week.

Also i've corrected the date to Sat 9th April

A note from Chip Control-

"We are looking at starting the day at about 9.00am,

Dyno runs will be in the order of arrival,

On the day Photos will be taken of your vehicle and pasted in the picture gallery for public viewing.

You will all receive a Dyno print-out of your run.

You will have a choice in how you want your power graph to display.

For example: AFR, Torque etc.

We'll see you all on the day. "

Shivam.

Al Grand Master

Al

Posted
Posted

I have actually driven it dip shit, and if you can't see the differance between jealousy and some friendly teasing well shove it up your ass!

Great going Scoota, first post and all you bothered to do was; miss read my post and insult me. Not bad from a person that is trying to organise their first event with SAU.

RBN1 Mentor

RBN1

Posted
  • Author
Posted
I have actually driven it dip shit, and if you can't see the differance between jealousy and some friendly teasing well shove it up your ass!

Great going Scoota, first post and all you bothered to do was; miss read my post and insult me.  Not bad from a person that is trying to organise their first event with SAU.

Al, he was kidding around. Take it easy. He wasn't trying to organise anything for SAU. I thought it would be beneficial for our guys to get a $30 dyno run. Please try and organise something cheaper if you think you can.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...