Jump to content
SAU Community

Recommended Posts

My 33 came with a Blitz 3inch cat-back exhaust from japan (with cannon).. When idling I rekon it sounds pretty quite/tame, but still very deep.. As you drive harder it gets noticably louder but..

Overall very well balanced cat-back system... Cost about $800 for cat-back or $1500 for full turbo-back system i hear...

I have a very similar sound clip of a blitz exhaust if u want it...

jagr33 (jack) im pretty sure has a twin 2.5" mufflers on his gtr which i think flow just as much as most other 3" or 3.5" systems but are no where near as loud, perhaps you could pm him and ask what model he has?

'quiet' for one person = 'loud' for another

what's my point? get a custom-made exhaust from a reputable exhaust shop and choose exactly how loud you want it

a $2000 brand-name piece of pipe doesn't automatically flow better than a similarly-shaped custom $600 jobbie... you can test a number of muddlers to find one you like if you don't want a cannon one.

but then again, some people just have to have the brand name...

I am yet to own a car (the count is 11 now I think) that has had a brand name exhaust.

All of mine were custom (at least cat back) and are always louder than others I've heard with jap systems.

that's why I asked the question.

hahaha, The liberty RS Turbo I had a few years back.. man that thing had such a deep and loud sound that it was unbearable at about 3200rpm.. it was a little quieter on either side of that rev range.

minimum 4 car alarms would go off in every car park.

the S14 is not that bad, but still loud.

come to think of it, my skyline before wasn't too loud and it was custom..

hmmm.

my exhaust system is a custom 3inch mandrel bent job from turbo back.. its generaly 'quiet' but dont know wat the **** alarm system it was the other day but i started up in an angle park on a side street and set off a car alarm :rofl: was rather funny but yer i havent been hassled about my exhaust by cops yet.. but yer its a plain straight thru system with just the rear cannon 4inch tip.. isnt to bad all up cost was around 1k for the whole system.. with split dump pipe all stainless.. all tig welded

I've got a custom aussy job.

It is a 3" from the turbo back, 3" highflow large cat, larger center resonator (this is the trick to a nice flowing quiet exhaust) and finally a large rear straight through muffler that only 'just' fits. The rear of the muffler is painted black and leaving the muffler is a single 3" s/steel tip. It doesn't attract any attention.

Nor does it have a 1kg milo tin sticker attached. hahah :D

The exhaust has a nice note, doesn't drone and cannot be heard when cruising next to it with the window up, with the window down you can only hear a slight growl.

D&T Performance in Adelaide (google) did the exhaust. One dissapointment with it is the lack of quality or care that went in to the dump pipe.

D&T Performance in Adelaide (google) did the exhaust. One dissapointment with it is the lack of quality or care that went in to the dump pipe.

What do you mean by this? Did they damage something? I ask cause I got my catback done at D&T Performance, and was seriously thinking in getting them to do the full exhaust sometime.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...