Jump to content
SAU Community

Recommended Posts

Guys,

I'm interseted in checking out a track day so I can test out the car away from the public roads - more sensible, me thinks.

How often are these organised, what is involved in getting your car onto the track (ie scrutineering), costs, blah, blah, blah?

My other concern is that my car is semi-auto, so hard on the brakes on a track. It's not the cost of having the brake pads replaced that concerns me, but the possible brake fade that shoots me over the ripplestrip & into the fence.

Does anyone else here "track" their auto gearbox?

Cheers

Mean

Link to comment
https://www.sau.com.au/forums/topic/69142-so-when-is-melbournes-next-track-day/
Share on other sites

Next track meets are on:

April 10 - Sandown (Maseratti day)

April 16 - Winton (WRX club sprint)

I suggest that you wait till the Winton day, as the track is open and has very few walls that can be hit. Also is a great starter track due to it's amount of slow speed corners.

These are both CAMS affiliated events, so you will need to become a SAU Vic club member ($70) click here for forms. Then you will need to contact Andrew (Snowman), via PM, to arrange the CAMS LS2 licence ($83).

For CAMS you will need the following saftey items:

- Small Fire Extinguisher (Approx. $20)

- 2nd bonnet restraint (Use 2 looped cables with latching hook, works great and doesn't put holes in your bonnet)

- Metal valve caps, on your tyres.

- A approved road helmet

- Long sleeve cotton shirt, and paints

- A blue triangle sticker to indicate battery location (Can use blue electrical tape)

Regarding brakes:

First and most important thing, change your fluid to racing brake fluid. This will resist brake fade at the extreme racing temps. I use Casterol SRF ($100-$120), but others are happy enough with Motal ($40). If you still want more clamping, upgrade your pads, then if you want more again, go for some slotted rotors. Do not use "cross drilled" rotors when racing on a track, as they can crack.

Good luck and see ya out there :(

Alan

Thanks for th info Al.

I will have to get organised if the 16th of April is the Winton track day.

How many from SAU are going?

Are the tracks crowded - it would be my first time on a track, so prob don't want too many "unknowns" around me - different if was was racing someone else go kart though!

Does the brake fluid you mention make a big difference?

Also, id there anything else people do to prep their car for a track day?

Can you use a motorcross (full face) helmet?

Thanks in dadvance,

Dave.

Here is the best palce to look...http://www.skylinesaustralia.com/forums/fo...splay.php?f=102

Even if you dont think you will be up for this Sat/Sun at Phillip Island, or Sandown or following week at Winton, you should consider coming along and meeting people and having a look to get a feel for how the days run.

As for brakes, you will be fine, some Bendix Ultimates or even better RB74s (plenty of other pads work really well, but these pads are only about $150, readily availabel and work well)

For fluid, just be mindful if you are using a racing fluid, check with hwom your buying it off. Some are harder on seals etc then other fluids.

Dave - also to add to your questions - Anthony (heartbrk) is the only guy I have known to run at the track in an auto Skyline (R33). He hasn't had any issues with the box but I can tell you from being in the car it is a decent challenge to drive an auto skyline around a track. Unlike a manual where you can really brake into a corner the auto's you have to brake well before and drive though the corners. But I wouldn't say that an auto will be much harder on brakes than a manual. I know I avoid engine braking my car as much as possible these days. Your main issue will be having the right gear when you want to power out.

But you can have fun learning all that on the track.

As far as the tracks being crowded - normally at somewhere like Winton you will have about 10 cars on the track in a group. All spaced out. Also - due to the distances to Winton the field will be a lot smaller than say what you will see at Sandown on Sunday so at Winton you will also get more track time (I expect)

Motorcross helemt is fine as long as it has an approval number on it. Scotsman will be using his motorcross helmet as per usual.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...