Jump to content
SAU Community

Recommended Posts

Did a search, didn't turn up anything solid…

For you guys running 18's on an R32GTR, can you please post:

1. wheel size (inc offset and width)

2. tyre size (inc brand)

I want to know what options I have for a set of Volk TE37s 18 x 9.5s +12 in terms of tyres.

I was thinking 245/40/18's or 265/35/18.

*The stock 225/50/16's have a rolling diameter of 631mm

*245/40/18's have a rolling diameter of 653mm

*265/35/18's have a rolling diameter of 643mm

I don’t really want to roll guards (but will if I have to), nor do I want to have *much* rubbing...

Which will be a better fit?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/70119-r32gtr-18-wheels-what-tire-size/
Share on other sites

643 mm versus 631 mm = 2% conservative speedo readings. That would just about offset the factory optimistic (high) readings.

I have no problems with fitting 255's, so 265's would be fine.

I run 8" with 35 mm offset, so that's 137 mm out and 66 mm in.

A 9.5" with 12 mm offset is 133 mm out and 108 mm in.

Rolling the guards would not be required, the rims are 4 mm further in than the 8's but the tyres are 10 mm wider. So thats 5mm, further out, making the 265 tyres pretty much in the same spot outwards as the 255's.

Inwards clearance is therefore your only issue.:)

Something doesn't sound right there SK, a +12 9.5" should stick out a lot more than a +35 8".According to my offset calculator:

"The clearance from stut housing to the inside of the wheel will be 4mm MORE

The outside edge of the wheel will EXTEND an extra 42mm"

Unsure about offset. 18x9.5, 245/40's. The car is lowered a bit, and the rubber *just* clears the inside of the front guards. A greater profile wouldn't fit. And if you care, 245 on 9.5 leaves LOTS of room - if I did a gutter park, I'd prob scrape the rim first. That said, 245's tramline enough that I find it annoying - 265's may be worse.

Tyres: Yoko A539's + Federals (that hold better that you'd expect, unsure of model)

Mark

Something doesn't sound right there SK, a +12 9.5" should stick out a lot more than a +35 8".According to my offset calculator:

"The clearance from stut housing to the inside of the wheel will be 4mm MORE

The outside edge of the wheel will EXTEND an extra 42mm"

Let's do the numbers;

8" = 203 mm

Centre is 203 / 2 = 101.5mm

+ 35 = 136.5 mm out

Subtract 136.5 from 203 = 66.6 mm in

9.5" = 241.3 mm

Centre is 241.3 / 2 = 120.7mm

+12 = 132.7 mm out

Subtract 132.7 from 241.3 = 108.6 mm in

I think that comparison you are doing is maybe -35 to -12.:P

ferni....yeah i know what you mean. i turned right into a street when there was light rain, not speeding, not accelertaing, and the thing understeered and i almostdrove into the gutter! not looking forward to winter!

Marcus, im guessing you want 18s for a brake upgrade and also looks etc.

Id suggest sticking with 17s, you can fit just a wide a tyre on them , are always going to be lighter, cheaper to buy, and most importantly that cheater rubber you use on that cheater car is a damn site cheaper in 17s then 18s:)

With the right caliper and the right rim you will even be able to fit a 343 x 32mm rotor in there. Worst case scenario a 330 x 32mm rotor...combined with a nice alloy hat, larger diam and good curved vane design you should find the car stopping more consistantly with lower brake temps.

If you go 18s and want to run 355mm rotors etc, remember that a caliper that can saddle such a large rotor can also be a bit more expensive...but imagine how nice the car would stop with 355-365mm rotors and 18" semis:whackit:

LOL...move over and let me drive:)

Let's do the numbers;

8" = 203 mm

Centre is 203 / 2 = 101.5mm

+ 35 = 136.5 mm out

Subtract 136.5 from 203 = 66.6 mm in

9.5" = 241.3 mm

Centre is 241.3 / 2 = 120.7mm

+12 = 132.7 mm out

Subtract 132.7 from 241.3 = 108.6 mm in

I think that comparison you are doing is maybe -35 to -12.:)

S.K. you got it the wrong way around .

+ 35 means 35 mm offset to the inside , so + 12 will stick out more than + 35 .

In the example above +12 will be 132.7 mm in and 108.6 mm out . +35 will be 136.5 mm in and 66.5 mm out .

Marcus, im guessing you want 18s for a brake upgrade and also looks etc.  

Id suggest sticking with 17s, you can fit just a wide a tyre on them ,  are always going to be lighter, cheaper to buy, and most importantly that cheater rubber you use on that cheater car is a damn site cheaper in 17s then 18s:)

With the right caliper and the right rim you will even be able to fit a 343 x 32mm rotor in there. Worst case scenario a 330 x 32mm rotor...combined with a nice alloy hat, larger diam and good curved vane design you should find the car stopping more consistantly with lower brake temps.  

If you go 18s and want to run 355mm rotors etc, remember that a caliper that can saddle such a large rotor can also be a bit more expensive...but imagine how nice the car would stop with 355-365mm rotors and 18" semis

LOL...move over and let me drive:)

If you're going to cheat, do it properly! I was actually considering grabbing the GTR 17's from 2.06L Stacey...

But damn i love volks...

S.K. you got it the wrong way around .

+ 35 means 35 mm offset to the inside , so + 12 will stick out more than + 35 .

In the example above +12 will be 132.7 mm in and 108.6 mm out  . +35 will be 136.5 mm in and 66.5 mm out .

In my terminology + = positive

Hence +12 = positive 12 mm offset

I want to know what options I have for a set of Volk TE37s 18 x 9.5s +12 in terms of tyres.

:)

  • 2 weeks later...
hey do u know if i could fit these on my r32gtr

18x10.5 Offset -10

18X12 Offset -20  

thanks

Without flares, no chance. AFAIK 18x9.5 +12 is about as far out from the hub as you will be able to get away without the wheels protruding the guards.

That will be some FAT dish

  • 1 month later...
after some really quick help!!!!

R32 GTR with R34 GTR rims.... what tyre DOES fit.... who has them on there car?

Im looking at running the 265 35 18 RE55.....

if anyone knows for sure please reply :)

I am 99% sure they will fit fine. The stock 245.40.18's fit with plenty of space, so should be A-OK with the 265's

I will be running 265.35.18 RE55s' on my 18's when I can pay them off too :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...