Jump to content
SAU Community

Recommended Posts

LOL...3240s, i dont know d1ck about engine building so shouldnt comment. :)

It sounds like a lot of fun...but with turbos that size i would have thought you would need more then mild port and polish, you would need really high lift, long duration cams...extensive headwork and the valvetrane set up to love 10,000rpm cause you wont be seeing 20psi until around 6,000-65000rpm i suspect...so are you still running std ratio gearbox. Anyway im sure you have looked into it and understand it all better then most of us sisnce you have already built the engine

LOL...sounds like awesome fun, and good work for having a go, but i think you will have some work to do making the whole package work. I suppose you can always sell those tasty turbos and go for something a little more sane like twin 2835s:)

Is it a drag car, dyno car...if its a dyno car then get it tuned up on some serious jungle juice and lets see what the beastie can do:)

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

i just got my new engine and very nice indeed what do people think how much power i would make at the rearwheels in a r33gtst put your info in and i give you the honest power figure? as it follows in mods

 

 

Rb26 stroked out to 2.8

hks crank  

hks rods

hks pistons  

N1 nismo cams  

hks valves and springs

mild port and polished head

hks cam gears  

n1 oil pump

n1 water pump  

1000 cc injectors

100 mm throtlebodie

pair of 3240 hks turbos

and running it with motec m800 ecu  

3 half in dump pipes into 3 inch nur spec r blitz sys

and nice new pair of fuel pumps and new fuel lines tobe put in  

and nismo fuel reg  

 

this it was ive got done and now have all built ?  

as im yet to put it in the car i just want peoples thoughts of what power im going to put out in the rear wheels

I find this hard to believe this is real

but if it is there are a few issue with the system

1000cc injector you going to need new fuel rail

N1 fuel regulator i would dont be up to the job

twin 3.5" into one 3" wtf (i run 3.5"single for 320hp turbos)

a twin 3" might get by

N1 cams (why oh why would you skip on cams)

N1 oil pump (you cant be seriously going to run a std flow pump with a 1200hp turbo set up)

and where is your cooling system

5" thick cooler

oil cooler

custom sumpcustom radiator

etc etc

cause if you don't you mos well go burn the money now

ive been talking to steve while hes been in japan... this aint a bullshit thread.. he is a very broke man. lol and is even cutting his holiday time back because he spent to much on little toys... wait and see and drool along with the rest of us. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...