Jump to content
SAU Community

Piston's what type are good

Boosting

By Boosting,
in Engines & Forced Induction

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

what thread is that?

there are 100's of RB's running around with Arias pistons man.

Lots of cars here in Vic including mine. No problems.

As im sure you would know, no piston will last if you have detonation.

pnblight Mentor

pnblight

Posted
Posted

have any of you guys look at hks from greenline ~$1390 plus shipping not bad for a very good pistons, as i'm current concidering which piston to buy myself. And i to have seen a few set of arias fail (mainly the rings) and a nasty looking set of cracked veriola's to.

Mik Experienced

Mik

Posted
Posted
have any of you guys look at hks from greenline ~$1390 plus shipping not bad for a very good pistons, as i'm current concidering which piston to buy myself. And i to have seen a few set of arias fail (mainly the rings) and a nasty looking set of cracked veriola's to.

Peter, I'm pretty sure that HKS and other Jap branded pistons are made by one of the US manufacturers anyway.

pnblight Mentor

pnblight

Posted
Posted
Peter, I'm pretty sure that HKS and other Jap branded pistons are made by one of the US manufacturers anyway.

I have no idea where there made but buying a Japanese name brand like HKS,TOMEI,TRUST etc gives you a good guaranty of quality as there name rides on it and everything i have seen from them have been premo quality. But if your trying to say that Arias are the same pistons as HKS, cos there made in the USA i think your sadly mistaken. America make some awesome engine components and at the other end of the scale some s..t stuff as well, so where its made doesn't worry me more the quality of it.

Again this is only my opinion cheers

:)

So r32-gts when is the gtr going to see the track it must be getting dirty in the shed by now :)

Mik Experienced

Mik

Posted
Posted

I agree with you totally...anything from HKS, Tomei, JUN, NISMO, Turst etc that I have ever seen has been excellent quality. Actually, I don't think I have seen anything

(not just car parts) from Japan that weren't the best around.

But...a couple of years ago when I was enquiring about pistons for an RB26, I was told that a couple of the Jap brands pistons were made by Arias. (Nick Arias wouldn't tell me which ones for obvious reasons) I haven't even seen an HKS piston, so I don't know if it was them or not. It would just be annoying paying 500bucks for 6 HKS logs...that's all.

NickR33 Grand Master

NickR33

Posted
Posted

the guy who built my engine said that Arias made some of the best pistons he had ever seen...

one thing to note tho... the clearances listed on the instructions maybe a little big, you may want to run a slightly smaller clearance... ie mine were done to the specs on the sheet and it is pretty noisy on cold start up etc

but I agree with the comments here... just pick a tried and tested brand and you can't go wrong

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...