Jump to content
SAU Community

Recommended Posts

AUTO - MOTION AUSTRALIA

HIGH PERFORMANCE DRIVE DAY

ORAN PARK GRAND PRIX TRACK

MONDAY 2ND MAY

G'day drivers,

The crew from Auto-Motion will be holding another fantastic no speed limit high performance track day, this time it's the full Grand Prix track at Oran Park. A full day of quality instruction for those who want it, or a great social outing with a dash of speed for those with the need.

This is a dedicated circuit day with no drifting, just driving! Cost is $275.00 inc gst.

Coffee & cakes will be on from 8.00am, and a scrumy BBQ lunch will be provided.

We will also have a qualified mechanic on hand all day for any "emergency" repairs.

CAMS C3 assessments will also be conducted on the day, just let our office know you want a licence to race & we'll look after the rest. Cost is $550.00 inc gst.

HERE'S A FIRST......any holder of a current CAMS licence can attend the day to test their car for only $150.00 inc gst! Our expert crew will assist with car set-up advice and driving tuition if required.

DRIVER CHALLENGE SERIES REGISTERED DRIVERS may attend the day at a rate of only $55.00

Booking form is attached in pdf format.

Looking forward to seeing you on the day.

Cheers

Everyone at Auto-Motion

Auto-Motion Australia

Ph/Fax: 02 48 722-622

Mob: 0410 317 013

www.auto-motion.com.au

www.aaronmcgillmotorsport.com

Turning dreamers into drivers.

Link to comment
https://www.sau.com.au/forums/topic/70786-oran-park-gp-track-day-monday-25-155/
Share on other sites

no mate, $155 for cams license holders is quite cheap which is why I thought it was worth posting up this time. Aaron is normally pretty expensive but CAMS must be covering off the insurance in this case.

no mate, $155 for cams license holders is quite cheap which is why I thought it was worth posting up this time.  Aaron is normally pretty expensive but CAMS must be covering off the insurance in this case.

any cams licence? L2S?

if so, this could be a winner.

OK you will need to be a member of SAU NSW or another CAMS affiliated club. Then, you need to get hold a an L2S CAMS license, which is $81, SAU can issue them on the spot, or you send the forms to CAMS about 2 weeks before.

I'd suggest someone contacts Aaron to confirm L2S is sufficent, and if there is an SAU discount as usual. But $155 is pretty good, and Oran Park GP is a top track :D

OK you will need to be a member of SAU NSW or another CAMS affiliated club.  Then, you need to get hold a an L2S CAMS license, which is $81, SAU can issue them on the spot, or you send the forms to CAMS about 2 weeks before.

I'd suggest someone contacts Aaron to confirm L2S is sufficent, and if there is an SAU discount as usual.  But $155 is pretty good, and Oran Park GP is a top track :rofl:

so whats the CAMS card we got through SAUNSW?



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...