Jump to content
SAU Community

petrol plan?

skypilot

By skypilot,
in Victoria

 Share

Recommended Posts

skypilot Enthusiast

skypilot

Posted
Posted

i got this is a email a moment ago.. maybe worth a try??

Petrol prices - worth thinking about!

I called the number on the bottom of the email, and it is for real. This initiative does come from Barry Minster, worth calling and chatting to him if you need reassurance.

Apparently we are going to hit close to $1.35 a litre by the winter. If this happens the prices will flow on down to the price of every thing we buy! Want petrol prices to come down? We need to take some intelligent, united action. Philip Hollsworth, offered this good idea.

This makes MUCH MORE SENSE than the "don't buy petrol on a certain "day" campaign that was going around last April or May! The oil companies just laughed at that because they knew we wouldn't continue to "hurt ourselves" by refusing to buy petrol. It was more of an inconvenience to us than it was a problem for them. BUT, whoever thought of this idea, has come up with a plan that can really work.

Now that the oil companies and the OPEC nations have conditioned us to think that the cost of a litre is CHEAP at .89 / .95 cents, we need to

take aggressive action to teach them that BUYERS control the marketplace not sellers. With the price of petrol going up more each day, we consumers need to take action. The only way we are going to see the price of petrol come down is if we hit someone in the pocket by not purchasing their

Petrol!

And we can do that WITHOUT hurting ourselves.

Here's the idea:

For the rest of this year, DON'T purchase ANY petrol from the two biggest oil companies (which now are: BP and Mobil). If they are not selling any petrol, they will be inclined to reduce their prices. If they reduce their prices, the other companies will have to follow suit. But to have an

impact, we need to reach literally millions of BP petrol buyers. It's really simple to do!!

Now, don't wimp out on me at this point...keep reading and I'll explain how simple it is to reach millions of people!! I am sending this note to a lot of people. If each of you send it to at least ten more (30 x 10 = 300) ...and those 300 send it to at least ten more (300 x 10 = 3,000)...

and so on, by the time the message reaches the sixth generation of people, we will have reached over THREE MILLION consumers!

Again, all you have to do is send this to 10 people. That's all. (and not buy at BP and Mobil) How long would all that take? If each of us sends this email out to ten more people within one day of receipt, all 300 MILLION people could conceivably be contacted within the next 8 days!!! I'll bet you didn't think you and I had that much potential, did you! Acting together we can make a difference. If this makes sense to you, please pass this message on.

PLEASE HOLD OUT UNTIL THEY LOWER THEIR PRICES TO THE 80 cents a LITRE RANGE.

It's easy to make this happen. Just forward this email, and buy your petrol at Shell, Caltex, GAS. or Gull Outlets and drive past BP and MOBIL Stations.

Link to comment
https://www.sau.com.au/forums/topic/70964-petrol-plan/
Share on other sites
saff_cossie Grand Master

saff_cossie

Posted
Posted

Had this in the UK and it made no difference. It went round some huge forums there but the price stayed the same. As others have said BP and Mobil are the two best performance fuels anyway. The kind of people who would make in impact if any is the family people who just use ordinary unleaded and are not too phased by the petrol type.

Link to comment
https://www.sau.com.au/forums/topic/70964-petrol-plan/#findComment-1309170
Share on other sites
pkblade Experienced

pkblade

Posted
Posted

I'm not saying it won't happen, but I received an almost identical email to that, last year. At the time I thought it could work too, but realistically it's unlikely we'll see the good old days of .80c p/ltr (maybe if BP had coupons, hehe).

Has it crossed anyones minds it could be a marketing ploy by the other service stations??

If we all start boycotting BP & Mobil, there'll be a lot of sick :spew: running imports on the streets.

Link to comment
https://www.sau.com.au/forums/topic/70964-petrol-plan/#findComment-1309223
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...